bernie lamers Posted on Nov 02, 2014

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Where to locate the wiper relay on 96 eagle vision

My intermittant wiper function is inop.. I bought a new relay and i want to know where it's located on the car

1 Answer

Adam Scott Roberts

Eagle Master 1,243 Answers
Posted on Nov 06, 2014

Adam Scott Roberts

Eagle Master

Joined: Jul 13, 2011

Answers

1243

Questions

Helped

438888

Points

3837

The car has two wiper relays, intermittent and Hi/LO relay, both are located in the power distribution box in the engine compartment.

5 Related Answers

Anonymous

3533 Answers
Posted on Jan 22, 2009

SOURCE: location of fuel filter

it could be under the hood or under the car just inside the frame

Anonymous

3 Answers
Posted on May 18, 2009

SOURCE: locate fan sensor on 1997 eagle vision

Your fans (low and high) have number of parts.
1. Temputure sensor
2. Hi and Lo fan relays (PCM)
3. Relay located in the fan assembly itself

If you car over heats either in idle or when you turn the air conditioner you are having an eletrical issue. The fix is easy but can take some time, rewireing and a relay.

Hope this helps

Anonymous

1 Answer
Posted on Jun 16, 2009

SOURCE: Where is the Fuel Filter located?

The fuel filter is on the passenger side just in front of the rear tire tucked up next to the frame rail for the rear tire.

Joel Friedenberg

1114 Answers
Posted on Jun 27, 2009

SOURCE: I need to know where the fuel pump is located on a

The fuel pump on your vehicle is located in the gas tank! I believe there is an access hole from the trunk. The hole has a plate over it. Remove the plate, and follow directions to remove pump.
Recommendation: Repair manuals are always the first "tool" to get when you're planning on working on your vehicle.

If this info was helpful, please post... Thanks...

Anonymous

1 Answer
Posted on Jun 05, 2010

SOURCE: 96 eagle vision wipers dont move, motor does help

you need to check the connector to the motor, the bushing connecting the motor and wipers wears out after a while.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have an intermittent fault on my t5 transporter wipers. I would like to check the relays but don't know how to locate them can you help. Thanks

https://www.vwt4forum.co.uk/threads/t5-wipers-intermittent-problem.223032/

https://www.google.com/search?sxsrf=ALeKk01sgzHj0NmlZUXdmp9iLSZ8hbB_Cw%3A1584030641031&source=hp&ei=sGNqXtTCPIa_Up2UhdgE&q=I+have+an+intermittent+fault+on+my+t5+transporter+wipers.+I+would+like+to+check+the+relays+but+don%27t+know+how+to+locate+them&oq=I+have+an+intermittent+fault+on+my+t5+transporter+wipers.+I+would+like+to+check+the+relays+but+don%27t+know+how+to+locate+them&gs_l=psy-ab.3..35i362i39l10.2485.10651..11773...2.0..0.0.0.......10....2j1..gws-wiz.....10.ScyiR1wb0K8&ved=0ahUKEwjU2q39rZXoAhWGnxQKHR1KAUsQ4dUDCAU&uact=5#kpvalbx=_nGxqXvu-Nc3MaNKKhKAF34

Read full answer

Mar 12, 2020 • Cars & Trucks

0helpful

1answer

Wiper control module location on a 2000 f250

Did you check the wiper relay's in the under hood fuse box ? There are two ,wiper run/park relay & wiper high low relay ! Also ,did you check fuse's ? fuse # 11 - 30amp location cental juction box . The wiper switch is a input to the GEM module . Generic electronic module . The module in most cases isn't the problem ! Learning how to test these electronic systems is , people do not know how to test so they just replace parts . What they should do is take the vehicle to ford certified Technician who has the knowledge and testing equipment to find an fix it .

The generic electronic module (GEM) receives inputs from the following:

multifunction switch
anti-lock brake control module (vehicle speed signal [VSS])
ignition switch

The GEM uses these inputs to control the outputs to the following:

windshield wiper high/low relay
windshield wiper run/park relay
windshield washer relay
rear wiper motor relay
rear window washer relay
GEM Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1240 Wiper Washer Rear Pump Relay Circuit Failure GEM GO to Pinpoint Test K . B1241 Wiper Washer Rear Pump Relay Circuit Short to Battery + GEM GO to Pinpoint Test K . B1342 ECU is Defective GEM CLEAR the DTCs. REPEAT the GEM self-test. If DTC B1342 is retrieved, INSTALL a new GEM. REFER to Section 419-10 . B1431 Wiper Brake/Run Relay Circuit Failure GEM If the windshield wipers are inoperative, GO to Pinpoint Test B .
If the windshield wipers stay on continuously, GO to Pinpoint Test C . B1432 Wiper Brake/Run Relay Circuit Short to Battery GEM GO to Pinpoint Test B . B1434 Wiper Hi/Low Speed Relay Coil Circuit Failure GEM GO to Pinpoint Test D . B1436 Wiper Hi/Low Speed Relay Coil Circuit Short to Battery GEM GO to Pinpoint Test D . B1438 Wiper Mode Select Switch Circuit Failure GEM If the windshield wipers are inoperative, GO to Pinpoint Test B .
If both the windshield and rear window wipers are inoperative, GO to Pinpoint Test L . B1441 Wiper Mode Select Switch Circuit Short to Ground GEM GO to Pinpoint Test C . B1446 Wiper Park Sense Circuit Failure GEM If the intermittent windshield wiper speed does not operate correctly, GO to Pinpoint Test E .
If the speed dependent interval mode does not operate correctly, GO to Pinpoint Test G .
If both windshield and rear wipers are inoperative, GO to Pinpoint Test L . B1450 Wiper Wash/Delay Switch Circuit Failure GEM If the intermittent windshield wiper speed does not operate correctly, GO to Pinpoint Test E .
If the wash and wipe function does not operate correctly, GO to Pinpoint Test F .
If both the windshield and rear wipers are inoperative, GO to Pinpoint Test L . B1453 Wiper Wash/Delay Switch Circuit Short to Ground GEM If the windshield wipers stay on continuously, GO to Pinpoint Test C .
If the wash and wipe function does not operate correctly, GO to Pinpoint Test F . B1458 Wiper Washer Pump Motor Relay Circuit Failure GEM GO to Pinpoint Test F . B1460 Wiper Washer Pump Motor Relay Coil Circuit Short to Battery GEM GO to Pinpoint Test F . B1473 Wiper Low Speed Circuit Motor Failure GEM If the windshield wipers are inoperative, GO to Pinpoint Test B .
If the windshield wipers do not operate at high or low speed correctly, GO to Pinpoint Test D .
If the intermittent windshield wiper speed does not operate correctly, GO to Pinpoint Test E . B1475 Accessory Delay Relay Contact Short to Battery GEM REFER to Section 501-11 . B1476 Wiper High Speed Circuit Motor Failure GEM If the windshield wipers are inoperative, GO to Pinpoint Test B .
If the windshield wipers do not operate at high or low speed correctly, GO to Pinpoint Test D .
If the intermittent windshield wiper does not operate correctly, GO to Pinpoint Test E . B1611 Rear Wiper Mode Switch Circuit Failure GEM GO to Pinpoint Test H . B1614 Rear Wiper Mode Switch Circuit Short to Ground GEM GO to Pinpoint Test I . B1820 Rear Wiper Motor Up Relay Circuit Short to Battery + GEM GO to Pinpoint Test H . B1839 Rear Wiper Motor Circuit Failure GEM GO to Pinpoint Test H . - All other DTCs. GEM REFER to Section 419-10

Read full answer

Jun 06, 2017 • Ford F-250 Cars & Trucks

1helpful

2answers

What is the relay location in the relay box

The problem would be in the stalk controller. The wiper Relay is what provides power to the motor for all settings, the delayed wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working.

Read full answer

Jul 27, 2014 • 1998 Ford Ranger

0helpful

1answer