Question about 2011 Chevrolet Cruze
Without being able to be there to point it out, I'll attach a link and picture to help show where the actuator is located. It's on the right side of the heater housing, under the dash.
It should look like this:
Here is an exploded view of all heater parts.
The actuator will be part # 45 in the diagram.
HEATER BLOWER ASM Fits Chevrolet Cruze Tonkin Online Parts
Posted on Oct 31, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Blend door
ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min
Posted on Dec 15, 2008
SOURCE: constant high heat
on climate control press off and heat button and let go quickly. Then press automatic. The display will start rotating eventually displaying a code 025,125 , 024 etc. Then press defrost to stop. You may hear blend door operating atb that time. It worked for my climate control.
Posted on May 06, 2009
no it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa
Posted on Nov 25, 2009
I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.
Posted on Dec 07, 2009
Tips for a great answer:
Nov 16, 2017 | Cars & Trucks
Oct 19, 2016 | 2003 Chevrolet Impala
Oct 10, 2016 | 2012 Chevrolet Chevrolet Cruze LT
Jan 16, 2016 | Pontiac Cars & Trucks
Dec 26, 2015 | Chevrolet Monte Carlo Cars & Trucks
May 17, 2014 | 2011 GMC Acadia Denali
Feb 17, 2014 | Ford Freestar Cars & Trucks
Jan 05, 2014 | 2011 Chevrolet Cruze
Temperature Control Blend Door Failure No Heat or no AC (dependes on
where door sticks)
all modern cars there is a tiny DC electric motor driven gear drive
that moves a plastic door that blends heated and cooled air from the
AC and the heater core, this is called (interestedly enough) the air
temperature control blend door actuator. The motor that moves this
door fails because the door starts sticking from warping, most common
complaint is no heat but it can be no AC as well. To replace these
parts (blend door and blend door actuator) you must remove the entire
dash from the car. Always have this problem confirmed by a dealer or
qualified repair shop as it is a very expensive repair.
Other causes of no heat in the cabin are engine thermostats that are stuck open (engine runs cold) or air bubbles in the cooling system.
Dec 06, 2012 | Cars & Trucks
Oct 05, 2009 | 2004 GMC Envoy
Oct 11, 2017 | 2011 Chevrolet Cruze
8,485 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: