To ,set the static timing on your 6.9.
1. Remove the fast idle bracket and solenoid from the pump.
2.Slightly loosen the 3 nuts that hold the pump to the engine.
3.Turn the pump until the timing mark on the pump mounting flange aligns with the mark on the pump gear housing, within .030 inch.
4. Remove the tool and tighten pump mounting nuts securly and re-check the timing marks.
5. Reinstall the fast idle bracket and solenoid.
Once this is done, it will have to go to a diesel repair shop to be "dynamic timed". This pinpoints the timing exactly but must be done with very specialized tools.
86 views
Usually answered in minutes!
×