Two wheel drive
SOURCE: saturn crankshaft sensor
Right above the started. It can be removed from under the car withour taking the starer out. 5 minute job, one bolt
SOURCE: 2001 saturn l200 crankshaft position
usually at the crankshaft pulley it has markings/graduations to match alongside the front cover. These markings indicate the position before TDC. I am more familiar with Toyota vehicles, but the saem principle should be applied to other vehicles. Markings for Toyota would be about 4 strokes, starting from 0 then 5, 10, 15 etc. These indicate the amount of defrees BTDC. You will have to check to c how urs is
SOURCE: removal of 2005 Saturn Relay DVD player
when you flip it down look up between the display and the front there are screws in there
SOURCE: Disconnect sliding door chime 2005 Saturne Relay
On my 05 Relay I scratched the oxidation off of the switch heads and the contact plates on the door pillar. Worked for me.
Another fix I've read about is to take out and put back the PSD fuse. Then open and close the doors twice (with power button) for the computer to relearn the positions.
SOURCE: I am replacing the timing chain on my 02 saturn. I
okay i posted you a picture of the postion. be carefull not to turn the crank or the cams or you will damaged the valves. let me know if you need more hlep.
Removal & Installation
3.5L Engine
Fig. Timing belt routing and timing marks-3.5L Engine
Fig. Timing belt and related components-3.5L Engine
Fig. Adjusting the tensioner pulley-3.5L Engine
Fig. Measuring the auto tensioner rod-3.5L Engine
85 views
Usually answered in minutes!
×