Need to find out where the over flow hose goes on a 2000 jeep Cherokee
Coolant/
from rad to side expansion tank??
RAD nipple >>>>>>> to tank.
that?
my guess it fell off, which end, do say, if both ends, oh my , ?
the answer is in 2 places, the FSM book
and the online dealer parts page, its toss coin, lands on #2
toss coin 2 , the 4.0L I -6 engine, one of 5 million made
bingo 4L
http://www.factorychryslerparts.com/showAssembly.aspx?ukey_assembly=592155&ukey_make=1064&ukey_model=15525&modelYear=2000&ukey_category=20304&ukey_driveLine=7407&ukey_trimLevel=18765&searchString=tank
hose #3?
free to look at any time , in fact all 3000 parts.
SOURCE: How to replace headlights on 2000 Jeep Grand Cherokee
One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.
62 views
Usually answered in minutes!
×