SOURCE: headlight replacement on a 1991 pontiac grand am
Sealed Beam Type
Remove the headlight bezel
To avoid turning the vertical or horizontal aiming screws, refer to the illustration before removing the headlight retainer.
Remove the headlight trim screws then...
... pull the trim off while holding the bulb
4. Pull the headlight out, then carefully detach the electrical connector.
Pull the bulb out far enough to disconnect the wiring
To install:
SOURCE: how to change radiator coolent 1998 pontiac grand am se v6 no rad.cap ?
You do it thru the overflow-reserve tank. That is the pressure cap normally found on the radiator.
60 views
Usually answered in minutes!
×