<!-- from fixya rte -->Keyless entry code for 2010 ford explorer - 2010 Ford Expedition

SOURCE: CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE

Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

SOURCE: Need factory code for keyless entry pad

To locate the original keypad code, open the passenger/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 5L2T-15K602-EA. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code.

SOURCE: how to reset factory code on keyless entry ford five hundred

if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck

SOURCE: I can't find the keyless entry code for my 2004 ford freestar

The code is on the fuse box under the dash near the hood release. On my van there are two bar codes on a sticker attached to the fuse box. Under the first bar code, on the right side is the 5 digit code (bring your glasses the numbers are really small). After you get this code, just search the internet and there are plenty of forums on programing the keyless remote and also adding your own unique number to the key pad entry.

Good Luck

SOURCE: 2008 FORD EXPLORER - KEYLESS KEYPAD CODE LOCATION?

For the 2008 Ford Explorer ONLY (SUV). Look under the steering wheel. There is a black fuse box near emergency brake pedal. You will need a flashlight and a dental mirror (very tight space. Look between the lower lid of the box on the slim space to the left side. Take your time, you will see a bar code and 5 above it...That's it! I found mine that way. If you are laying on your back looking up, it's the gap above your right shoulder.GOOD LUCK!