Answer- On the top they just snap out. A little force works fine.Bottom usually not a problem. Some find difficulty with the top. I changed mine in no time.
MOST OF THESE HAVE A TORX BOLT ON TOP AND BOTTOM, YOU WILL NEED SOMEONE TO LIFT UP ON THE LIFT GATE TO ALING THE BOLTS STRAIGHT
SOURCE: 1996 jeep cherokee sport
Not hard to Replace. You can get these at Sears or Maybe your Auto Parts Store. Just do one Side at a Time. Please Rate My Response! Thanks!
SOURCE: 1987 Jeep Cherokee -Rear lift gate will not open
Remove the trim from inside the vehicle and release the latch rod manually. Once it is open you can further diagnose the problem. It may just need to be lubed from the inside.
SOURCE: 1994 Jeep Grand cherokee rear lift gate
Well My 94 Jeep Grand Cherokee had the same problem and we had to just cut into the lift gate panel from the inside. It required cutting plastic but with a 94 looks arent everything and a working lift gate was worth it. But then we pealed back this black plastic mat under the panel and lifted up on the release bar(verticle bar that lifts the latch) and once we got it open we adjusted a little clamp that had slipped. Dont adjust it too much or when u lock it it wont lock! But sorry i dont know the name of the parts. But then u can screw the panel back in and it wont look to bad besides some cuts.
SOURCE: how can i easily trouble shoot rear defrost
Use a test light and see if you get current to the grid. Check it on the sides. If no current check the switch and fuse.
SOURCE: Jeep Cherokee sport, husband broke
you can remove those bars to shut the gate BUT when you do theres nothing to hold gate from dropping all the way down to bumper. hope this helps!!!!
86 views
Usually answered in minutes!
×