I want to know how to remove it. with images please
SOURCE: 1991 300zx water pump replacement procedure
Quickest and easiest way to get you the info is here - check this link:
http://www.ttzd.com/tech/timingbelttech.html
This will walk you through the entire timing belt replacement procedure. Simply follow the disassembly until the water pump is off, and then reinstall everything in reverse order.
SOURCE: fuel pump relay
inside the door pillar , behind passenger door . sorry no picture . strange location but thats what the manual says . for 87 nissan 300zx . hope thats a fix ya !
SOURCE: 1986 nissan 300zx timing belt replacement, cams moved!
the gears of the timing are marked with little indents on the gears and little dimples in the tin behind the gears on the cams and on the bottom gear (crank shaft) there is on the aluminum housing behind it the top is open and on the front side is a lip that only goes a short distance half inch or so and then it has a notch in that lip and goes back to the lip . thats the bottom timing notch . you line up the notch and the marks and its right ... turn the engin over twice and check it .. it should still be the same .. the timing belt needs to be only so tight so dont over do the adjustment .. half an inch of deflection at twenty pounds of presure .. measure it between the rear of the car cam and the tension adjuster .. half an inch should be measured as its more movement then normaly figured as tight i thought .. good luck .. paul in sw idaho
SOURCE: 1986 nissan 300zx wont shift
1986300zx,will not shift into overdrive,mechanic says the overdrive solenoid is bad or the relay,the od light on the shifter states...help!
SOURCE: how to remove a 1989 nissan 300zx starter
Changing StarterIts easy, jack the car up, secure the car with in the up position do not just rely on the jack to hold it up and you will see the starter on the passenger side of the car, its held on with 2 bolts. Disconnect the battery first, then loosen and remove the 2 bolts holding the starter in place. Slide the starter out, disconnect the wires coming from the battery. Reverse the procedure to replace the starter.
164 views
Usually answered in minutes!
×