Need front right cv axle seal replaced on 2000 chevy blazer
SOURCE: how to replace front cv axles in a 1999 chevy
that is a big task and your normal tool box wont have the big socket you need also a heavy duty roll jack if you really want to do this first start with a hanes manul u can get them from autozone even check there web site
SOURCE: Replacing my CV Axles
Hi, your axles on the metro are actually called half shafts, any larger name parts house can order them for you. Call them with the Make, Year, and Model and they will take care of you. you will need to tell them,drivers side or passengers side. Hope this helps!
SOURCE: 96 chevy blazer rear axle bearing/seal r/r
No. Did you run some emery cloth along the race (bearing surface) to make sure it was smooth and clean? If you leave any part of the old seal or debris on the hub surface, damage the seal when installing it, not liberally packing the bearing with grease or the seal did not seat right you can have issues like yours. Make sure the seal is installed flush and if everything looked good as far as the axle and surfaces, pack more grease in the bearing. When you think there is enough grease in it, put more in. Put the grease in the palm of your hand and with the bearing held flat in the other hand repeatedly tap the bearing on your palm until grease comes out both sides. Then put more on it when you seat it.
SOURCE: 97 ford explorer awd bad right front cv joint
No, never drive without cv shafts, i tried it and my wheel bearing blew apart and I lost a wheel after driving for 10 miles
38 views
Usually answered in minutes!
×