SOURCE: how do i replace a offside front lower suspension arm ball joint
You need to get or rent a ball joint splitter, maybe $20? or so to buy. Some parts stores (autozone does this, one reason i recommend them, but other stores may also) will rent you some tools for "free" when you buy parts there .. they take a big deposit in case you bolt ... but give it all back for return of the tool in good condition.
It's easy ... if you know how to work on suspension .. if not, get a Haynes manual for your car from part store, amazon or haynes.com for around $20, the blood and busted knuckles you save due to reading it will be worth the money ;~).
SOURCE: Change front wheel bearings
u will need to remove the brake cailper and the the brake rotor, then the hub retaining nut, that is a large metric nut, the bearing and hub must come off, then u will need to take this hub to a machine shop or the dealer and have the new bearing pressed in.
BCA/NATIONAL Part # 510078 {Ball Bearing Bore=1.5354" Outer Diameter=2.9134" Width=1.4173"}
Front Wheel PRICE: $47.99, PART SOURCE: Rockauto.com
SOURCE: REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL
hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.
SOURCE: How do I locate and change the thermostat on my Hyundai Tiburon?
it sound like the thermostat
check upper rad hose at the eng.the therm.is there
SOURCE: How do you change upper and lower ball joints on 2001 Ford Expedition?
i am not going to lie to you on this. if you do not have a very good mechanical back ground you should not attemp this procedure your self because it could result in serious injury. it should be brought to a shop because they do have the right tools to do this. alot of the time ball joints are pressed in under extream amounts of pressure
133 views
Usually answered in minutes!
×