Cars & Trucks Logo
A
Anonymous Posted on Sep 30, 2014

My ford windstar 2002 power window is not working

My ford windstar 2002 power window is not working except the front right side check fuses already and they are ok.everytime I push button switch like hear a click sound under steering dashboard.i don't know what to do next.pls.iappreciate your help.....

1 Answer

Johnnie Stewart

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Expert 102 Answers
  • Posted on Jan 09, 2016
Johnnie Stewart
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Jul 15, 2015
Answers
102
Questions
19
Helped
38895
Points
205

Sounds to me like the motor is bad.

4 Related Answers

Anonymous

  • 2 Answers
  • Posted on Apr 07, 2009

SOURCE: Ford Ka 1.3 T reg. Front window washer not working

look for washer fluid container under hood, follow small hose underneath it to washer motor pump, once you find it check conector to it, if ok unplug and connect direct 12v power to it, if it works check clogging of hoses and exit holes at windshield, if not then replace it..

Ad
Sean80000

Sean Piquet

  • 1867 Answers
  • Posted on Dec 02, 2009

SOURCE: My '02 Ford Taurus SES windows won't roll down

Power windows are wired through their own relay which is usually located in the fuse box. If you don't have faulty switches in your window system I would have the relay checked out.

If you cannot operate any of the power windows and you lost power on all at the one time it is most unlikely that the motors are faulty.

fkuk

fkuk

  • 311 Answers
  • Posted on Dec 31, 2009

SOURCE: 2000 FORD WINDSTAR 3.8 NO POWER TO FUEL PUMP TRIED

check fuses

Testimonial: "Thanx that was it. Did not think relay would work with bad fuse."

Jonah Oneal

  • 14092 Answers
  • Posted on Aug 04, 2013

SOURCE: We have a ford windstar 2000 and recently my wife

steering gear loose or steering gear defective

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Tried it today and none of the windows work from master switch on drivers side except ft passenger window, which went down but will not go back up.

You can't put up the front passenger window with it's own switch ? Did you check the POWER WINDOW RELAY in the instrument panel fuse / relay box ? An you checked POWER fuse 30amp same fuse box ? All window switches have direct power from power window relay !
Fuse Block - Instrument Panel
Left of the Steering Column, behind the storage Compartment
P/W Relay
--
Sunroof Switch Assembly, Window Switch - Left Front, Window Switch - Left Rear, Window Switch - Right Front, Window Switch - Right Rear
1helpful
1answer

2002 thunderbird window won't go up or down replace swith still wont work fuse are ok does the switch get power

The master switch connector does have circuits that have power on them. The Master switch is not directly connected to the window motors. The switch sends a signal to the Front Electronic Module and the module controls operation of the motor on the driver side. The passenger door window motor is controlled by a different module
0helpful
1answer

2000 Ford Windstar front windows stopped operating, all fuses checked

I suggested you use some OBD2 scanner to have a detect. Very easy to use and very useful.
0helpful
1answer

I need a diagram for a 2002 windstar. the power drivers window does not work and my husband put the whole new contraption inside the door and it will still not work right. goes down but not up. fuses are...

Moving only one way is usually the sign of a bad switch or a wiring issue, not the regulator/motor. It's usually the master switch that goes bad since it's used most often. You can't bypass it because the power and ground both run through it.
0helpful
1answer

I have a 1995 ford windstar. The driver side power window stopped working in the up position. When I depress the switch to lower the window, I hear a clicking noise like a relay coming from under the dash...

The clicking noise doesn't mean anything , relay controls one touch down . Just means relay is probably working ! Take the door panel off an check power to the switch , motor . Watch this videos . Test the electrical circuit The Trainer 24 Power Window Troubleshooting
Automotive Electric Window and Switch Troubleshooting Repair Guide

The motor or the switch or the regulator or maybe be a wiring problem .

4helpful
1answer

2002 explorer power window fuse where

In the battery Junction Box check fuse # 6-60AMP will feed Central Junction Box (under driver side), the inline circuit breaker #47-30AMP, through the Accessory Delay Relay, powered by fuse #17-15AMP to the Window Control Circuit. Check the fuses, and for 12v at the points. Then check for 12v at the driver side door switch pannel.

Also uou should check the plug into the main window button console in your drivers door. The little piece of plastic around the door handle pops out when pushed towards the front of the vehicle. This gives you access to the buttons and harnesses.

Good luck (remember rated this help).
3helpful
2answers

How do I fix the problem of all 4 power windows

See if you have power coming out of the master power window switch when a button is pushed down. Remove a door panel and check for power at the window motor with the switch pushed. If you do not have power it could be the master switch. Good luck.
2helpful
3answers

2002 ford windstar lx front passenger window does not work. Checked fuse 106, not blown, what next?

Turn on interior lamps and watch lamps while working switch, if lamps dim and no noise is heard in door ( like crunching sound) you need to replace window motor, if noise is heard you have a failed window regulator.Lights do not dim you may have a bad switch. You can also try to hit in center of door panel to see if window will start working which also means bad motor. Hope this helps.
1helpful
1answer

Stuck windows

if you hear the motor working, and the cable is fine. the trick is to apply a vinyl safe lubricant on the windows frame. (sides) you may even use a shampoo or a conditioner and keep on gliding it up and down with a little push hope this works. but it is best to dettatch the door sidings and check if the motor is working and the cables are oK
0helpful
2answers

DRIVER SIDE WINDOW WONT GO UP OR DOWN

Hello.Try this.while holding the button down on the drivers side window control,hit the door firnly with the bottom of your fist of with your palm.Do this a few times.If the window starts to work,the problem will be the power window motor.
Not finding what you are looking for?

1,212 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...