Cost on replacing the stater on my 2003 Honda Accord Coupe V-6?
Have you ever in your lifetime, gotten any vehicle
cost over the phone or on the internet,we are not
in the 1950's, when shops went to a book for a price,
then lost money doing the work at that price
That is not possible & never has been
No idea what country your in or what different
shops charge or what is involve to change it
No parts get replaced until they are tested & fail a test
May be nothing wrong with the starter
What if your had a price,then what,the job still has to be done
& you have to pay
SOURCE: I have to replace my accelerator app sensor, how
orallys probably the best bet dealer is going to be about double what they charge thats where i shop
2.
Remove the rear cover with the gasket and pins.
3.
Remove the cam ring.
4.
Remove the rotor and vanes.
5.
Remove the front side plate.
6.
Remove the inner and outer O-ring.
7.
Remove the spring.
When assembling, use a new gasket and O-ring.
8.
Remove the pulley nut with the spring washer.
9.
Pull off the pulley and the woodruff key.
10.
Remove the snap ring using snap ring pliers.
11.
Drive out the pulley shaft with the bearing. If necessary, use plastic hammer
89 views
Usually answered in minutes!
×