2001 Chrysler Voyager Logo

Related Topics:

A
Anonymous Posted on Sep 27, 2014

How do i unlock childproof protected lock on a 2001 chysler voyger van ?

It on the side doors of the van.

5 Related Answers

GMClover

  • 12 Answers
  • Posted on Jun 15, 2008

SOURCE: drivers side door lock

is the lock mechanism siezed,or is the linkage disconected?

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Oct 20, 2008

SOURCE: i have a problem with power sliding doors on 2001 Chrysler Town and Country limited

do you mean they are sticking?

Anonymous

  • 65 Answers
  • Posted on Dec 04, 2008

SOURCE: 2004 toyota sienna sliding door locking trouble

Sounds like something isn't right.Try to disconnect the battery for a few minutes and see if that helps.Some times the ecu gets haywired and disconnecting the battery might reset it.And if it is the original battery you might want to get it tested.

Anonymous

  • 61 Answers
  • Posted on Jan 28, 2009

SOURCE: Power door locks won't work

You need to have someone or yoursef check the body control module with a compatible scan tool. Thats where the problem you are having resides. It may need a software update or replacement. You can also disconnect the battery for a few minutes, that will cause the BCM to reset and may fix it.

Anonymous

  • 7 Answers
  • Posted on Feb 14, 2009

SOURCE: 2005 Pontiac SV6 Montana key fob unlocks doors but will not lock

For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I unlock a childproof protected lock on a 2001 Chrysler voyager van? It on the side doors of the van.

Hi Beverly, Im glad to help!

Its on the end of the door right by the latch and all that needs to be done is to move it to the unlock position. Sometimes they are hard to move so you may need a screw driver to move it. Hope this helps and have an awesome day Beverly.
1helpful
1answer

Both Power Locks Lock But Wont Unlock. Remote will unlock the doors

If the remote key fob locks and unlocks the doors then the problem is more than likely the power lock switches, this is a common problem on the Venture Van.
0helpful
1answer

2001 Mercury Villager keyless remote is malfunctioning

Keyless Entry
The keyless entry system consists of the following:
  • smart entry control(SEC)/timer module
  • keyless entry remote transmitters
  • power door lock actuators
  • body side door power door lock actuator
  • liftgate actuator
  • power door lock switches
  • door ajar switches
  • Principles of Operation
    All doors can be locked at once by turning the door key lock switch to the locked position. An individual door can be unlocked by moving the door key lock switch to the unlocked position and turning it again within five seconds; all the doors (including the liftgate) will unlock.
    The smart lock system is designed to keep the driver from locking his keys in the car. It will lock and then unlock all the doors if the smart entry control(SEC)/timer module detects the following conditions:
    • The ignition key still in the ignition.
    • A front door is open.
    • A door lock switch has been pushed to the lock position.
    The panic feature has a duration of 30 seconds from the last time the PANIC button is pressed. When locking the doors from the remote transmitter, the horn chirp/lamp flash feature can be disabled or enabled by holding the LOCK and UNLOCK buttons for two seconds. The hazards will flash three times to confirm that the feature has be enabled or disabled.
The control module probably see's an input that shouldn't be there . lock Switch , door ajar etc... Don't think it has anything to do with the remote . Some part stores have a tester to see if signal from the remote is working . Or the dealer ! Take it an see if your remote is sending a signal without you pressing any buttons .
If it is you need a new one .
0helpful
1answer

Door on 95 geo metro 4 door won't close because the child proof lock in on and I can't get it to go off. Door won't stay shut. Any ideas how to fix this?

Your childproof lock have nothing to do with the latch not closing. It only makes it where you can not open the door from the inside. I would think you are in need of a new latch.
1helpful
1answer

1998 Isuzu Trooper LS - How do you release the "childproof locks" on the back doors?

IF YOU OPEN THE BACK DOOR THERE SHOULD BE A SMALL LATCH THERE ON THE DOOR ITSELF SHOULD SAY LOCK AND UNLOCK SWITCH TO UNLOCK
10helpful
1answer

Power door locks going crazy

One of your door lock inside switches are bad.Find the one that doesn't feel right when you push it in either lock or unlock.The internal spring is broke causing the lock relay to keep try to lock or unlock until it gets hot & protects.
1helpful
1answer

2001 Town & Country Locking and Unlocking is Going Haywire

the body controller is at fault it may need the software update from the dealer... one thing you can do is disconnect the battery for about 5 minutes then when you reconnect it... the fob will work again...
0helpful
1answer

2001 Town and Country Lock and Unlock is Going Haywire on its Own

Door Locks Go Crazy 1



Door Locks Go Crazy 2

Door Locks Go Crazy 3


Not to difficult to understand what's happening ,when you know how they work .Plus you need tool the proper tools to diagnose .


0helpful
1answer

2001 chevrolet venture door locks malfuntion

this is a safty thing to stop you being locked out by kids messing around in the car
Not finding what you are looking for?

26 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...