SOURCE: licence light replacement
Remove license plate, remove screws and detach license plate pocket assembly. Rotate bulb holder, pull bulb straight out and replace.
SOURCE: license plates light
check light socket grounding...repair as necessary Check power at hot side of light socket with a test light, grounded on a clean unpainted part of chassis. If light lights, then check ground side of socket.
SOURCE: how to replace the license plate blub
open the trunk and remove the back panel in the trunk could be a couple of clips or a few screws holding the panel on one you remove the panel you should have easy access to the bulb just twist and remove. or on some avalons you need to pry the lens off the light to replace it then the lens will click back into place with a little push
SOURCE: 2000 Buick Lesabre custom liscense plate bulb
kind of tricky, took me an hour to get it figured out, but you got to opend the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together
SOURCE: 2000 buick lasbre shifting real hard and the
Replace pressure solenoid in transmission. Common problem.
66 views
Usually answered in minutes!
×