SOURCE: need a serpentine belt diagram for 2005 ford focus
You should have that diagram on the inside of your hood or on the fan shroud. Good luck
SOURCE: 2002 Ford Focus alternator replacement
I just did this for a friend this morning. Sounds scary bot it is easy.
1) remove P.S. fluid filler and pin it aside
2) remove radiator overflow canister and pin it aside
3) unplug wiring harnesses right over the alternator (back right of the engine compartment)
4) The scary part - remove the 3 engine mount bolts on that sode of the car
5) from the transmission jack up the engine just enough to tilt it forward slightly
6) it takes 2, tilt the engine forward and lift out the alt - you should have removed the belt at this time.,
7) take the sole (red) wire off of the alt.
8) finish in reverse order
SOURCE: i need a diagram of the serpentine for a ford
Hi
Thanks for using FixYa. You can look at this picture for serpentine belt for your 2002 Ford Focus Z3--
Ford Focus Z3 Serpentine belt Removal--
· Jack up the front of the vehicle and support it on jack stands. Use a wrench to remove two bolts and take off the drive belt lower cover.
· Note belt routing and make a sketch for your reference if you don't have a belt routing diagram from the manufacturer.
· Find the belt tensioner pulley. Use your wrench to rotate the tensioner pulley by pulling clockwise on a bolt in the center of the pulley. Slip the old belt off of the tensioner pulley.
· Release the belt tensioner. Slip the belt off of the pulleys and install the new belt according to your routing diagram.
· Rotate the tensioner again to allow the new belt to slip over the tensioner pulley. Release the tensioner again. Replace the drive belt lower cover and lower the vehicle.
Please do rate the solution and revert for further assistance.
Thanks
Rylee
SOURCE: diagram on how to install ford focus 2006 zx4 serpentine belt?
Autozone or a similar parts retailer will print one for you for free.
438 views
Usually answered in minutes!
×