SOURCE: EGR VALVE
REMOVAL PROCEDURE
INSTALLATION PROCEDURE
SOURCE: 2000 mazda miata r&r throttle body
se if egr is controled by vacium or electric
if it is by vacium then locate the egr solenoide and make sure it has vacium in one hose w/ engine runing if it does then replace solenoide
SOURCE: How do you replace the EGR valve on a 2000 Mazda
if you are lockey to have one it is on the intake manifold two bolts or three depending on the engine and some have a tube / and eather vaccum or electric wires attached // if you don't have an egr try changing your o2 sensors ( some manufactures use the o2 sensors as the up & down stream and have removed the egr valve
SOURCE: were is the egr valve located for mazda rotege5
2002 Mazda Protege5 with the FS2.0 Motor. The EGR Valve is located below
the throttle-body. You must take off the Intake tube to get a good view
of it. To replace it I think you might have to take off the
throttle-body.
Fig. Exploded view of the intake manifold assembly with 2.0L
(FS) engine
Good luck (remember rated this).
35 views
Usually answered in minutes!
×