Turn signals do not work.
Best thing is to do a Web search titled "1998 ford explorer wiring diagram". This will give you results which include fuse boxes and power boxes and color coded wiring routing. Check for other items that are on the same fuse as the turn signals to see if they work. The turn signal flasher unit could also be bad.
SOURCE: 1998 Ford Ranger XLT turn signals, hazzard flasher not working
wire plugin on back of turnsignal switch not making a connecting
SOURCE: turn signals wont work in 1997 ford explorer xlt
it sound as if the problem is in you switch and you will need a puller to get the steering wheel off also take the negative side off the battery before you start and remove the fuse for the air bags as well if you have a library near you there you can get all of the pictures and diagrams so you can do the job easier
SOURCE: 1996 Ford Explorer XLT abs light comes on on
The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......
SOURCE: 2002 ford explorer xlt 4x4... Vehicle won't start
My 2002 Ford Explorer have the same problem
SOURCE: i cant find the IAT sensor on my 98 ford explorer XLT v 6 SOHC
I have a 99 ford explorer 4x4, v-6 with a 4.0 engine I can not locate the IAT sensor. It is not located on the hose connected to the air filter. Where else could this sensor be?
854 views
Usually answered in minutes!
×