Installed new wheel bearings now need the torque for hub nut
clean all the grease if there is any out of the hub, turn the hub over and using a drift and hammer strike the shell from the back edge working around the shell as you go, should not take too much to remove it but you will need a bit more than a tap with the hammer.
Hope this has helped you
SOURCE: nut Torque Specification Guide 2004 Kia Sedona
Lower ball joints. Tighten the pinch bolts to 69-85 ft. lbs. (93-115 Nm). Outer tie rod ends. Tighten the nuts to 43-58 ft. lbs. (59-78 Nm). Sway bar links. Tighten nuts to 69-85 ft. lbs. (93-115 Nm). Hub retaining nuts. Tighten the hub nuts to 177-199 ft. lbs. (240-270 Nm). Front wheels. Tighten the lug nuts to 65-79 ft. lbs. (88-108 Nm).
SOURCE: 06 Kia rio axel nut torque
HI. Nut torque will be at 85 Foot pounds
Testimonial: "Thanks, very helpful "
Removal & Installation
1,951 views
Usually answered in minutes!
×