Question about 2001 Ford F250 Super Duty Super Cab

Open Question

How to replace heater core

Removel of old heatercore and installation

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 179 Answers

SOURCE: removel heater core

you either remove it from under your glove box or under the hood the first is more common

Posted on May 31, 2009

Ad
co7196

Ned C Cook

  • 3433 Answers

SOURCE: step by step replacing heater

If bolts won't come out and you've taken the nuts off, Then they are stiuds.Locate the heater hoses where they enter the firewall. The heater core is right on the other side of firewall. Which you probably already know. Good luck

Posted on May 31, 2009

Anonymous

  • 1752 Answers

SOURCE: har heatercore replaced heater blows its just not

1. Low on coolant
2. Air in cooling system
3. Clogged or broken valve leading to core

Posted on Dec 03, 2009

SlowLXNotch

  • 21 Answers

SOURCE: heater core removel 1996 ford explorer

The dashboard will need to be removed and then the a/c plenum,once the plenum is removed it must be disassembled to remove the heater core.

Posted on Sep 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for the location the heater core on the van


You didnt list the year make and model of the van but all heatercores are located inside the heater box. depending on the year and model there are some where the dash must be removed inorder to gain acess to replace the core, and some there are panels you can remove and then take heater box apart without removing the dash to gain acess to core. good day. heres a picture to help explain where the heatercore is .this would be inside the van on the pass/side under dash. good day.johnjohn2_154.gif

Aug 28, 2011 | Mercury Villager Cars & Trucks

1 Answer

Need step. By step images and instructions on heater core removel on 1995 Honda civc


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Jan 13, 2011 | Honda Civic Cars & Trucks

1 Answer

Removel of heater core


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 16, 2010 | 1997 Chevrolet Blazer

1 Answer

How yo change the heater core


are you sure its the heater core whats it doing i would check few things before digging out the heater core its not a easy task heatercore check thermostat if heater blows warm or cold air replace thermostat make sure you have the controls on correct settings inside of car make sure you have proper water levels in car let me no then ill tell you how to change heatercore

Dec 13, 2010 | 2002 Dodge Stratus

1 Answer

I need to install a heatercore on a 92 olds cutlass 3.3 engine not sure howto install need instructions on removal and replacement.


  1. Disconnect the negative battery cable and drain the cooling system.
  2. Disconnect the heater hoses from the heater core inlet and outlet connections in the engine compartment.
  3. Allowing residual coolant from the heater core to drain. Cap the openings.
  4. Working inside the vehicle, remove the lower instrument panel sound insulator and look for where the air blows to your feet.
  5. Remove the heater floor outlet duct screws or clips and remove the duct.
  6. Remove the heater core cover by removing the attaching screws and clips.
  7. Remove the heater core cover.
  8. Remove the heater core retainers and remove the heater core
  9. Reverse order to install leaving the covers off at first then connect all hoses, refill and check for leaks before putting covers back.

Jan 17, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Heater core replacement ford f250 how dificult is it


not knowing if you have a/c or the engine size il guess it has a/c and a 5.0 engine it takes about 1.5 hours not bad to do. pinch heater hose to core, then remove from heatercore.next remove glove box,now remove the 7 screw holding heater access cover to plenum.disconnect vacuum source,leave vacuum harness atchment to cover,then remove cover.then remove heatercore. to install reverse instructions, hope this is helpful good luck.

Dec 19, 2009 | 1995 Ford F250

1 Answer

2001 s-10 4.3 pickup. How to replace heater core.


changing the heater core in this vehicle is a long and annoying task. I just went through it. You will need to remove the entire dash board in order to access the heater core.Once you have removed the dashboard it isn't that tough. Try to cover the floorboards with plastic or something so coolant doesn't soak into your carpet. Remove the screws holding the heater core to the fire wall, disconnect the intake and return lines in the engine compartment and remove the heater core. Afetr you have removed the old core installing the new one should be easy. Dealerships will tell you that this is an 8 hr job and they will want $500 or more for labor but you can do it in 4 - 5 hrs. A new heatercore will cost around $50. Don't forget to have antifeeze on hand as you will lose some.

Dec 07, 2009 | 2001 Chevrolet S-10

1 Answer

Har heatercore replaced heater blows its just not


1. Low on coolant
2. Air in cooling system
3. Clogged or broken valve leading to core

Dec 03, 2009 | 2001 Ford Taurus

1 Answer

Replacement of heatercore


I believe you have to dissassemble the lower part of the hvac unit under the dash to gain access to the heater core, then disconnect the hoses at the firewall and remove the heater core.

Apr 13, 2009 | 1996 Buick Skylark

1 Answer

Replace a heatercore in a 1997 jeep grand cherokee


REMOVAL
  1. Remove the heater-A/C unit from the vehicle. "Housing Assembly HVAC : Service and Repair" See: Heating and Air Conditioning\Housing Assembly HVAC\Service and Repair
  2. Remove the heater core retaining screws.
  3. Pull the heater core straight out of the housing.
INSTALLATION
  1. Install the heater core into the housing.
  2. Position the clips over the heater core tubes. Install and tighten the screws.
  3. Install the heater-A/C unit into the vehicle. Under "Housing Assembly HVAC : Service and Repair" See: Heating and Air Conditioning\Housing Assembly HVAC\Service and Repair

Jan 14, 2009 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Ford F250 Super Duty Super Cab Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...