I had a new air sensor replaced in one of my tires now the air pressure monitor screen doesn't read properly, how do you reset it?
You need to drive for the new sensor to program into the WCM unless it's a after market sensor then sometimes the system will not recognize it.OE sensor would have to be installed then.If you have dashes where the tire pressure would be then this would be normal til the system see's a good sensor.Otherwise the Chrysler scanner could program the sensor # into WCM or WIN
thank you for your fast sesponse. I have driven it now for 3 months and the tpm stays on the monitor and i have to switch it to the outside temperature that i always had show up when i start my car, now since i had a new sensor on one of my tires the tpm stays on the screen and i have to switch it to my outside temp all the time, where as b4 i had the tire sensor changed it would always show the outside temp. And the tire pressure that comes up is wrong all the time .
×
Go into settings.Otherwise read your manual in glove box .If all else fails always read your manual thats what there there for.Automtive tech years experience.
With the key to off position then turn the key to "On" position, without starting the car. Old the TPMS UNTIL IT APEAR IN THE DASH ,Then start the car let it run for 20 minutes it will reset.
It have to flash 3 times before you start the car then let it run for 20 minutes.
×
995 views
Usually answered in minutes!
×