My enginge light came on recently and it is now causing the engine revs to become irregular.
SOURCE: change rear brake pads on mazda 323f 2l v6 1997
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: Mazda 323f sport 1999. How do you adjust parking brake?
Where the handbrake lever is,it will be covered by a boot of some sort.Peel this back and beside the lever will be either a rod with a nut on it,or it will have a recess for a screwdriver.with the h/brake off,do the adjustment by tightening it.When it's right, the h/brake should have to be pulled so 7 'clicks' can be heard.Hope this helps
SOURCE: i change thr plugs in my mazda 323f and now it
Check the gap on the plugs and be sure it is set correctly.
SOURCE: Mazda 323f: Rain water leak into cabin on drivers side, low down.
I am fixing a similar problem on my daughter's 2002 323 Hatchback (Australian BJ model, RH drive) at the moment. Rainwater comes in from above the clutch pedal.
If you look down thru the vents in front of the windshield near the wipers, you will see a spot-welded body seam running across the bottom of that recess. This is where hers is leaking. I originally sealed it with a RTV silicone sealant which fixed the problem but after approximately 6 months it has started leaking again. I am going to remove the silicone and seal over the seam with a brushable bitumen -type sealer.
Remove windscreen wipers and the vent panel for easy access to the area.
116 views
Usually answered in minutes!
×