Hey there! There was posted a wiring diagram re "What fuse controlled what on a VW Eos" which I can't read nor enlarge. Would there be same for a 2000 VW Jetta TDI? My horn stopped working, the fuse is good but don't know what relay I should look at that manages the horn or connections between the relay or fuse I should encounter. I have no pwr at the horns but good grounds on the other pins. The fuse should [be between relay OP & horn Y?]control the load downstream of the relay right?-vice power to the relay via the Steering Wheel switch to make the relay work! I still can't find which relay to check if there's switching V from the Str Wheel which shouldn't be fused either..! Anyone?
There is a "clockspring" wiring spiral in the steering wheel to accommodate the rotating steering wheel with controls on it. If this breaks, you may lose some or all functions controlled by stuff on the s-wheel.
I need to know what engine size you have 1.8, 1.9, 2.0 or the 2.8?
Master Tech Lee
Auto Repair Help US
The TDI is the 1.9 ltr engine
I am going to look and will give answer in the afternoon- thank you for the response, Master Tech Lee
Here you go the location of horn relay
Then there is one more Aux Dual Horn Relay www.autorepairhelp.us
See me at site at www.autorepairhelp.us for some reason I cannot get image to resize - fixya sizes them down
Here is the wiring Diagram
Hold on I will go to google drive
Copy link and you will be able to see up close. My goal is to provide an HONEST answer. If you have any more questions, please ask? If satisfied with my answer, please be sure to rate my answer. Please do not forget to Click a positive rating as this is the only way I receive credit for my answer, thank you. Best Wishes with your Vehicle Repair!! Bonuses are Appreciated! Thank you so very much. Master Tech Lee
Or you can highlight link and right click to go to page after that click the plus (+) button to see images up close
Make sure you have adobe reader installedhttp://get.adobe.com/reader/
×
Best way to find out is a multimeter pl;ace one lead to horn lead and the other to relay box to find the horn must pull out the relay and teast the leads til the meter either beepd or ahows connection that would be your relay to replace if bad.
Yes i know that's what I need to do but unless I can find which relay and I should expect there are about 20 relays unless I can find which that means doing continuity readings on 20 relays........ Which relay and is the fuse between the relay terminal and the horn or before the relay?? Nothing comes up for relay panel or relay placement only which fuse -which has a decal on panel cover for that! Does anyone have a wiring diagram?
×
4,372 views
Usually answered in minutes!
×