2005 for sure? not 3.0 CRD?
what box?, transfer case.
or main tranny, and if yes, which of the many,
a/T and M/t? we cant guess any of that.
what country,,,, as ours dont have that engine.
and if diesel it will run a special gear box. so... we cant guess this.
05 JEEP WJ
must be export model????
look at this wiki page, see that
there is no 2.8 there, be the first to add it? and be famous?
http://en.wikipedia.org/wiki/Jeep_Grand_Cherokee
SOURCE: 2005 DIAGNOSTIC ERROR CODE P0069, CRD ENGINE WONT
Are you traveling high ground like Rocky Mountain?
I will remove the ground cable for 4 minutes to reset all data in ECU.///clock and radio stations too : (
Let the ECU to relearn the local environment parameter.
Here's so info on how to prevent vapor lock
Ride with full tank of gas but NO TOP OFF.
Crack open gas cap carefully during rest stops to release / equalize gas tank pressure'
http://www.estes-park-information.com/vapor-lock.html
Good Luck
SOURCE: i have a 2005 jeep cherokee 2.8 crd the key
disconnect the battery or pull the ignition fuse,then replace the ignition
SOURCE: bank 2 sensor 2 2005 jeep grand cherokee replace
I seriously don't know where that sensor is located? Banks usually
reffer to the engine ignition coils on the engine, not drive or passenger side, anything. Sorry, I couldn't be of more help.
Good luck.
SOURCE: Hi My jeep cherokee 2.8 crd has knocking sound
Well, something is broken. I suggest that you get it on a lift, and listen with a Stethoscope and be sure the noise is in the tranny. There is not usually anything good that comes from a noise like you describe. A broken tooth on a gear damages the mating gear and those parts add up fast.
SOURCE: 2005 jeep grand cherokee heater control unit
There is a bulb inside each of the knobs usually in the center. Have you checked the Fuse?
249 views
Usually answered in minutes!
×