Check engine light stays on
You need to find out what codes are set causing the CHECK ENGINE light to illuminate. GO to any Advance Auto or AutoZone and they will read the codes for free. Do not assume that just because a code mentions a part that the part is faulty, especially if there are multiple codes set. Come back here and tell us the codes and we can help you determine your problem. Without the code(s), there are dozens of things that can set the CHECK ENGINE light.
SOURCE: Brake lights 1997 Chevy Lumina
i would check the bulbs first. then continue to the brake switch
SOURCE: 97 Lumina dash warning lights stay on
For the security light you need to replace the ignition lock cylinder or bypass the security system. For the other two, you need to have the car scanned to see what codes are in the ecm and the abs module.
SOURCE: firing order and camshaft sensor for a 96 chevy lumina 3.1 v6
Here is a diagram of your motor with the firing order:
SOURCE: 1997 Chevy Lumina 3.1L Security Light Problem
check your inteior light switch. for a tempory fix remove the bulb
SOURCE: in my 1997 Chevy Lumina 3.1L the CHECK ENGINE SOON light is on
If it was a stock rebuild the original PCM settings should be fine check all the fuses and wiring possibly something was damaged or left loose this stuff happens to the best of us.next the SES light needs to be reset with a scan tool make sure to record all codes stored in the computer as this will aid in diagnosing any problems. the car must be ran thru a drive cycle usually normal driving conditions of say a mix of city and highway driving until the PCM relearns all parameters like o2 sensors emissions sensors ect... this can also be checked with the scan tool in the readiness moniters these monitors will be reset every time the SES light is reset. when pumping the gas pedal 3 time you are just resetting the maintenance light.
239 views
Usually answered in minutes!
×