How to replace serpentine belt on 2006 4 cyl. Camry?

SOURCE: 2001 Toyota camry 2.2 L 4 cyl engine timming belt replacement

The 2001 Camry 2.2 has a timing belt.
Recommended change interval is 90,000 miles.
There is no good reason for putting the replacement off, as the belt may be stretched slightly when it nears the rec replace interval, and your mileage may suffer because the engine is not in proper "time".
If the belt jumps time or breaks, it will NOT damage the valves.

SOURCE: I need the routing diagram for the serpentine belt

there should have been a picture under your hood , but here ya go .

SOURCE: replacing the serpetine belt on a 2006 camry

OVER THE CRANK PULLEY BETWEEN TENSIONER AND WATER PUMP DOWN TO PWR STEER PUMP PULL ALL SLACK TO THE ALT . PULL TENSIONER TOWARDS FRONT OF CAR AND INSTALL TO ALT.

SOURCE: how to change serpentine belt on 207 toyota camry

4 cylinder diagram
6 cylinder diagram
Loosen the tensioner pulley to remove the belt. It is the one that has a long bolt running through it. Once you remove the old belt, install the new one using the appropriate diagram from the above two links. Readjust the tension using the bolt you loosened to remove the old belt.

i hope this helps
matthew

SOURCE: need serpentine belt diagram for

try this