2002 Nissan Altima Logo

Related Topics:

A
Anonymous Posted on Aug 30, 2014

2002 Nissan Altima

Why did the direction indicator (compass) on my rear view mirror stop working? Fuse? Battery?

5 Related Answers

pal03246

Phil Lovisek

  • 726 Answers
  • Posted on Jul 17, 2008

SOURCE: 2002 nissan altima

On the left hand side by your left knee, there is a fuse box. Sound like for some reason , you blew a radio fuse. Remove cover, find fuse that sais RADIO and check it.

Ad

Anonymous

  • 726 Answers
  • Posted on Sep 14, 2008

SOURCE: rear license plate lights

do they have covers on them?
if yes they will clip off then 2 screws behind that for the plate

Anonymous

  • 93 Answers
  • Posted on Sep 14, 2008

SOURCE: nissan murano 2204 rear view mirror installation

Adhesive is available @ most auto parts stores. I believe it is a Loctite product (or equivilent). Just ask a salesperson and they should be able to help you, good luck.

Anonymous

  • 740 Answers
  • Posted on Dec 27, 2008

SOURCE: Rear view mirror bumped and fell off - how do I reinstall?

Go to Auto Zone or any other auto place and buy some rear-view mirror adhesive its a kit with a cleaner and a clear glue it Works will re-attach mirror. Good Luck

Anonymous

  • 48 Answers
  • Posted on Feb 28, 2009

SOURCE: Outside temperature display on rear view mirror

Here are the instructions to reset flashing airbag light, the instructions are for an Armada but I believe it will work on all Nissan models of this period. It wont hurt to give it a try. If that doesn't work you may have a problem that should be looked at by your local Dealer.

>>>
1. Turn the key from off to on.

2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.

3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)

4. Repeat steps 1-3 two more times until you have done the cycle three times.

5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.

6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

www.nissanhelpforums.com

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2000 Mercury Grand Mar Quis LSMultiple things stopped working at same time

Changing a serpentine belt shouldn't affect any of the electrics. Changing a starter only carries a risk when disconnecting and reconnecting the battery before and after swapping the starter motor. Done correctly that risk is low.
So, No clock, no heater control panel, no rear view mirror compass and both power door locks don't work? Does the car still start and run normally? Do the power windows (if fitted) still work?
This still sounds like a fuse issue. How did you test the fuses? Fuses can look OK but still be 'popped'.Somewhere around 2001 some changes were made to the fuse box layout on that model. Is your dashboard fuse panel the smaller square 18 fuse panel or the larger, longer 32 fuse panel?
0helpful
1answer

Direction indicator (compass)

check the wire is connected to fuse panle
1helpful
1answer

Tucson 2009 - Mirror Directional Compass is not working.

You will need to replace the mirror, they are not repaired and this one is most likely defective. I would have the dealer confrim this is the case as the new part is about $400.00
1helpful
1answer

I have 2002 Yukpn Denali XL. There is a OC code that appears in the rear view. What is the cause of this and how can I fix it?

The "OC" indicates your compass is "Out of Calibration". Below is the proceedure to recalibrate your compass.

Compass Calibration
The compass may need calibration if:
 After five seconds, the display does not show a
compass heading (N for North, for example), there
may be a strong magnetic field interfering with the
compass. Such interference may be caused by a
magnetic antenna mount, magnetic note pad holder
or a similar magnetic item.
 The compass does not display the correct heading
and the compass zone variance is set correctly.
In order to calibrate, the letters CAL must be displayed
in the mirror compass windows. If CAL is not
displayed, push in the COMP button for approximately
eight seconds or until the letters CAL are displayed.
The compass can be calibrated in one of two ways:
 Drive the vehicle in circles at 5 mph (8 km/h) or less
until the display reads a direction, or
 drive the vehicle on your everyday routine and after
several turns the compass will become calibrated and
will display a direction.

Good luck.
2helpful
1answer

Outback 2002 subaru - Rear view mirror foggy; stopped working

there is nothing the shop did the that caused this they do that because of the heat inside the car sitting out in the sun
Not finding what you are looking for?

32 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...