2005 Mercury Sable Logo

Related Topics:

G
Gene Smothers Posted on Aug 26, 2014

Where is the Manual Lever Position Sensor located on a 2005 mercury sable?

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Nov 12, 2008

SOURCE: DPFE Sensor with codes PO401 And PO402

The DPFE is located near the EGR valve, it has 2 very thick silicone rubber hoses connected to it that come off the exhaust. It is rectangular and about 1/2 the size of a pack of smokes

Ad

Anonymous

  • 659 Answers
  • Posted on May 03, 2009

SOURCE: location of the camshaft position sensor in a 2004 mercury sable

it is located on top of the engine right below the air inlet tube at the base of the intake it is a black sensor on top of a silver housing where the distributor would normally be

Anonymous

  • 218 Answers
  • Posted on May 05, 2009

SOURCE: Camshaft Position Sensor Location

IF U GO TO THE RIGHT SIDE OF THE ENGINE AND LOOK 4 INCHES BEHIND THE BELT IT WILL BE ON TOP OF THE TIMING COVER.THE WIRES WILL BE RED/WHITE,BLACK,BROWN/WHITE

Anonymous

  • 169 Answers
  • Posted on Jan 05, 2010

SOURCE: Where is the manual lever position sensor located

Dear Curlydrumzx,
This sensor is located on the left side of the transmission. It is the switch just below the shift cable.
To change it,you need to block the wheels and jack the left front side up.This is to gain access. Apply the park brake and shift the unit into neutral. On the side of the transmission, disconnect the shift cable and the bracket. Unplug the electrical connector. At this point,there are two bolts holding the switch to the side of the transmission. Remove them and pull the switch away from the side of the transmission.
You can reverse the order to reinstall. The only other step is to align the switch to the neutral position before you tighten the two mounting bolts. Ford has a tool #T92P-70010-AH that does this. They are available through aftermarket tool companies and can be rented from some parts houses. Some people can line up the marks on the switch. I prefer the line up tool,that takes out the guess work.
The switch has a list price from $100-$150. You maybe able to get it cheaper from other manufactures.
I hope this helps.Drop me a line if you need any other information. Thanks,Chuck

Anonymous

  • 163 Answers
  • Posted on Mar 28, 2010

SOURCE: fuel pump relay location on 98 mercury sable

its under the hood on driver side what the problem not starting check the trunk area for the fuel cut off switch poss bad or tripped did u get hit or someone bump ur car

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

May i see the location of the crankshaft position sensor on a 2003 Mercury sable ls premium sable 3.0L

USA car? yes/no? lost spark did you>? or DTC p03xx errors>?
that sensor is called CKP, and on cars engines it can be many places, some even oddly places, it is not the cam sensor CMP
the 2003 , 3.0 liter V6

the manual covers this.
https://eautorepair.net/Marketing/Default.asp

i will show a photo of it mounted, just using google . (brave)

some times just pretend to buy the part at the dealer, Merc
and see where it is , at ford.com
the dealer says it also fits Ford Mustang 1996 - 2014
that fact makes it more easy.
oooooohooooooo , there are 2 engines that year,
2 valve and 4 valve per cyclinder, oops not told shown in the service manual
2V
The crankshaft position (CKP) sensor:
  • is a variable reluctance sensor.
  • is mounted on the engine front cover.
  • is triggered by a 36-minus-1 tooth trigger wheel located on the crankshaft pulley and damper.
  • provides base timing and crankshaft speed (rpm) to the powertrain control module (PCM).
4V, ok , luck you its the same but not CMP





ckp-undefined-undefined-0.jpg

ckp2-undefined-undefined-1.jpg

e4e3d578-c8ee-42f6-b329-ee6d462894ef.jpg


8949b315-8f71-429e-b635-bd352d0a9108.jpg
0helpful
1answer

Where is the crankshaft position sensor in a 1994 mercury sable gs 3.0?

Always next to the crankshaft pulley :>D

How about some videos Tracy? You can also click the images tab.

https://www.google.com/search?q=1994+mercury+sable+gs+3.0+CPS+location

..
0helpful
1answer

2003 Sable engine change

check the location of the cam position sensor. if they are in the same place ,then use all the sensors from the old motor
1helpful
1answer

May i see the location of the crankshaft position sensor on '93 sable 3.0L

For the 3.0 Vulcan 12 valve engine, it's on the front of the engine, just up to the left of the crankshaft pulley. One illustration indicates about the 11:00 o'clock position relative to the pulley, and may be obscured by waterpump

9_11_2012_8_45_37_pm.jpg
1helpful
2answers

Where is my throttle position sensor located on my 1995 mercury sable 3.8l

The Throttle Position Sensor is located at the top center rear of the engine, on the throttle body.
Here is a diagram showing where the TPS is located on this vehicle.
Hope this helps...

9_9_2012_1_02_38_am.gif
1helpful
1answer

The computer is reading 1120 my manual only goes to 995 what is 1120?

P1120Throttle Position Sensor out of range, This sensor is about 1 inch in size, and is located on the throttle body
2helpful
1answer

Location of the camshaft position sensor in a 2004 mercury sable

it is located on top of the engine right below the air inlet tube at the base of the intake it is a black sensor on top of a silver housing where the distributor would normally be
Not finding what you are looking for?

67 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...