Key won't turn all the way back ...won't release key ..,vehicle completely dead now
SOURCE: keyless remote wont work, vehicle completely shut down
Hi Russell,
Absolutely no power? No dome light? No head lights? Nothing?
When you step on the brake pedal, no brake lights?
If true, start at the source and pop the hood.
This is going to be a bit of back and forth dialogue. I'll ask some questions and you get me the answers. That way we can get to the root of the problem. To save time, I'll ask multiple questions at a time. Here goes.
Try getting a jump, when the cables are attached does anything light up?
Does it turn over and start?
Does it do anything?
Comment me back with your findings
Mike
The Toyota Electronic Control Module does not have
programming modes without a pre-programmed key.
If there is no key available that
is already programmed into the module, the module
must be replaced.
To delete all
but one key from the unit:
Type E
1. Simultaneously depress and
release brake and accelerator pedals 1 time.
2. Insert existing master key
into ignition. Do not turn the key from the OFF (LOCK) position.
3. Within 15 seconds of inserting the key, depress and release the
accelerator pedal six times.
4. Within 10 seconds of
completing the above step, depress and release the accelerator pedal seven
times.
5. The security light will
flash, indication all keys other than the one being used have been deleted.
6. Remove the key from the
ignition cylinder within ten seconds. It will be the only key still
programmed to work
Add Duplicate Key:
1. Simultaneously depress and
release brake and accelerator pedals 1 time.
2. Insert existing master key
into ignition. Do not turn the key from the OFF (LOCK) position.
3. Within 15 seconds of
inserting the key, depress and release the accelerator pedal five times.
4. Within 20 seconds of completing the above step,
depress and release the brake pedal six times and
remove the key.
5. Within 10 seconds, insert the
new key into the ignition.
6. Within 10 seconds, depress and release the accelerator
pedal one time.
7. After 80 seconds the new key
is registered and the security light will go off.
8. Remove new key and depress and
release the brake pedal 1 time.
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
71 views
Usually answered in minutes!
×