What is the spark plug gap chart on a 2001 toyota corolla tazz 1,3 litre using ngk bp6es spark plugs

NO ENGINE TOLD AT ALL OR VIN OR COUNTRY.
3 ENGINES USED. 2.4, 2.7 AND 3.4v6

FIRST OFF LEARN THIS FACT
THE MACHINES AT NGK SET ALL PLUGS TO
0.045" NEVER TO 0.45 ( i CAN THROW A HAT THROUGH THAT CRAZY WIDE GAP)
SURE YOU MISSED A KEY ZERO.
SURE.
AND EACH MAKER PLUG USES THERE OWN DEFAULT STANDARD MACHINE GAP . (FACTORY)
NOBODY MAKES A SPARK PLUG FRONT 100,000 ENGINES. NOBODY. THEY ARE BY HEAT RANGE AND SIZE.
THAT MEANS SET THE GAP TO OEM TOY SPEC.
NGK CATALOG ONLINE EVEN TELLS THAT SPEC.

IDLES HIGH COLD OR HOT ENGINE OR BOTH
NOT TOLD AND IS A KEY FACT NOT TOLD.
THE SPEC IS
IN THE SM

Adjust the spark plug electrode gap. Electrode gap for new spark plug is 1.0 to 1.1 mm (0.039 to 0.043 in.).
BEST IS 1MM SET, AND THAT LOWER SETTING
ALLOWS THE GAP TO WIDEN IT IT AGES AND RUN LONGER AND BETTER.

NO PLUGS TOLD
THE OEM TYPE CALLED J PLUGS ARE SET PER ABOVE
BUT SOME ODD DUCK BOSCH SURFACE FIRE
ARE FACTORY SET (BOSCH) AT 0.063 AND NOT ADJUSTABLE AT ALL
SO AS YOU LEARNED SPARK IS COMPLEX./
FOR SURE RUNNING ANY KIND OF ODD PLUGS.
SOLD NOW.

ID RUN

NGK 7090 G-Power; Pre-Set Gap: 0.040" Info
OE-Recommended Gap: 0.044"
SEEN HERE

https://www.rockauto.com/en/catalog/toyota,2001,tacoma,3.4l+v6,1375343,ignition,spark+plug,7212

SEE NEXT POST ON JUST IDLE. WRONG.

1.1 mm
but there are differences between brands and types ( platinium cq irridium)

http://www.easycarparts.nl/toyota/corolla-e11-sedan-1997-2001/1-3-12_v-2e-05-1997-10-2001/motor/ontsteking

In your owners manual

Maybe under the hood on label

On all parts & plug mfg sites

They come gaped

NGK shows .052 I found it,need to use the internet better

I believe it is 0.040 Good-Day!

41 thou gap.

you need to replace your top gasket i had the same problem with my tazz the car decided to start over heating and used alot of water so take it away and have it fixed before your problem becomes bigger and i payed R1000 to have my car fixed properly

Buy Toyota plugs.

Please do not use anything but Nippondenso or NGK; anything else will perform poorly, and you may have driveability issues.

Set the gap to .032"

We hope this helps you out.

Do you happen to have a hacksaw blade? The thickness of the hacksaw blade is equal to the clearance of the
spark plug contacts. You can put the hacksaw blade flat
between the contacts, and make the necessary adjustment. Then, start your engine. Send in your e-mail
so we will know.

The correct spark plug gap for the 1.5 litre engine is .032"