120 Amp Fuse replacement
SOURCE: reversed polarity while jumping lexus sc430..HELP!
its very possable the ecu is damaged, but you will need to check all the fuses and or fuseable links
SOURCE: Fuse Box ( cover) diagram for a 95 Lexus LS 400 is missing.
check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.
SOURCE: HOW TO REPLACE 100A FUSE ON 1994 LEXUS GS300
The 100 Amp alternator fuse is blown under the hood in the fuse block,
it has a clear plastic cover on it for inspection, the designation is
marked inside the fuse panel. This fuse is bolted in inside the fuse
box, the fuse box has to be removed and opened to get to the bolts that
connect the fuse in.
Here you have the Lexus-GS-300-Wiring-Diagram-Manual
Good luck (remember rated this help).
SOURCE: Brake lights aren't working on my 2000 Lexus Rx
Hi the problem you are having is more than likely the brake light switch so to find the switch you need to have a real close look at the brake pedal then if you follow the brake pedal to the very top you should see the switch behind the brake pedal at the top, this is where you switch is located, it may have come loos or even might just need tightening up slightly, if that dont work then your going to need to replace the switch, its not hard to do but just have a look first so you have got some idea what you are dealing with.
let me know how you get on or if you need further assistance ok
1,636 views
Usually answered in minutes!
×