Question about 1992 GMC Sierra

1 Answer

How to replace door glass gasket on 92 GMC sierra

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 271 Answers

Remove old door glass gasket and with window down and door panel removed press new lubed on outside edge with syl glide gasket into groove at top back corner of window opening and press in firmly working your way forward one way and down the other alternately until you get to the ends roll window up slowly to help seat gasket and voila

Posted on Aug 10, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
wilsodfarm

Donnie Wilson

  • 986 Answers

SOURCE: Torque Specs for Head Bolts on 1997 GMC Sierra V8 5.0 Vortec?

.0L Torque Specs Belhousing to engine bolts 28-38 ft/lbs Camshaft sprocket bolt 40-45 ft/lbs Camshaft thrust plate to engine block bolts 108-144 in/lbs Crankshaft pulley to vibration damper bolts 35-50 ft/lbs Cylinder head bolts -1979-1992 --Step 1 55-65 ft/lbs --Step 2 65-72 ft/lbs -1993-up --Step 1 25-35 ft/lbs --Step 2 45-55 ft/lbs --Step 3 75-85 ft/lbs Differential shaft lock bolt 15-30 ft/lbs Driveshaft U-joint to pinion flange bolts 70-95 ft/lbs Exhaust manifold bolts 26-32 ft/lbs Flywheel mounting bolts 75-85 ft/lbs Front engine mount nuts 72-98 ft/lbs Intake manifold to head bolts --Step 1 96 in/lbs --Step 2 16ft/lbs --Step 3 23-25 ft/lbs Intake manifold (upper intake to lower) 12-18 ft/lbs Oil filter insert to engine block adapter bolt 20-30 ft/lbs Oil pan mounting bolts -1979 --Step 1 (Large bolts) 11-13 ft/lbs --Step 1 (Short bolts) 7-9 ft/lbs --Step 2 (Large Bolts) 15-17 ft/lbs --Step 2 (Short Bolts) 10-12 ft/lbs -1980 to 1987 9-11 ft/lbs -1988 to 1993 6-9 ft/lbs -1994-up 110-144 in/lbs Oil pickup tube to main bearing cap nut 22-32 ft/lbs Oil pickup tube to oil pump bolts -1979 to 1987 10-15 ft/lbs -1988-up 12-18 ft/lbs Oil pump mounting bolts 22-32 ft/lbs Pinion bearing preload 8-14 in/lbs Pressure plate to flywheel bolts 12-24 ft/lbs Rocker arm fulcrm bolts 18-25 ft/lbs Spark plugs 7-14 ft/lbs Timing chain cover bolts 12-18 ft/lbs Vibration damper to crackshaft bolt 110-130 ft/lbs Wheel lug nuts 85-105 ft/lbs

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you clamp the regulator to passenger door if the window clamps are in the way on a 2003 GMC Sierra? The window clamps won't go down much, I just have to clamp the regulator and crew it down and then...


Its best to attach the regulator to the door frame with the bolts first. Then plug in the motor and run it to the bottom. Then attach window glass to regulator, with the bolts. Do Not run the window up to the top without the glass attached. The cables will run off the end of the regulator channels. Approximately half way up the window to glass bolts will also line up thru holes in the frame. You can disattach the glass and hold it in place by simply using duct tape to the glass and the upper door frame. It will stay in place.

Apr 04, 2011 | 2003 GMC Sierra 1500

1 Answer

Will a slim jim unlock the door to a 04 gmc sierra


Hi, a slim jim will unlock the door, it has to be done in the rear of the glass, between the glass, and molding, you want to go to the door latch area, (mid door), from there it's all you, do not force anything, as you can pop off the control rods, and the door would have to come apart. Good luck...Coop

Dec 12, 2010 | GMC Sierra 1500 Cars & Trucks

1 Answer

HOW TO CHANGE DOOR LOCK 1989 GMC TRUCK


mcdevito75 here, The door panel will have to come off, maybe a special tool needed also. Let your local glass repair shop change that lock.

Jun 17, 2010 | 1989 GMC Sierra

2 Answers

Can the glass be tightened in the power mirror of a 2003 GMC


well i wished i could say yes but they basically consist of plastic bushings to hold in place once their broke thats it replace mirror assemble thank you have a nice day

Apr 26, 2010 | 2002 GMC Sierra 1500

1 Answer

Replacing aan intake gasket on a 97 gmc sierra


average around 500 cost at a shop

Apr 15, 2010 | 1997 GMC Sierra

1 Answer

Power mirrors are loose, how do i tighten them?


Hi, if the complete unit is loose you will find bolts on the inside of the door just above the door panel behind a cover (usually a triangular shaped cover), that you will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a screw driver in and tighten the screw on the inside to secure the glass.

Jan 17, 2010 | 2003 GMC Sierra 1500

1 Answer

2004 GMC Sierra 2500 HD. Drivers side mirror was


You should be able to replace the glass, but I believe it is glued in place. You should be able to tell as you remove the old pieces. It is a special white glue.
I was able to get a great price for the whole mirror on ebay. even the ones with signals and heated.

Hope this helps

Jan 09, 2010 | 2008 GMC Sierra 2500HD 2WD

1 Answer

Replacing alternator


Yes, disconnect the battery. Remove the belt. Disconnect the wire leads from the rear of the alt. Remove the bolts. Reverse steps to install

Jul 17, 2008 | 1992 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...