Cars & Trucks Logo
A
Anonymous Posted on Aug 07, 2014

What is the wiring diagram

The driver side power window switch does not work. the passenger side does work

1 Answer

Jerry Brentnell

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Contributor 55 Answers
  • Posted on Aug 09, 2014
Jerry Brentnell
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 07, 2010
Answers
55
Questions
0
Helped
22500
Points
81

It sounds like a defective window switch! dealer can get you a print out of wiring diagram

5 Related Answers

Scorpedo

Jamie Heppner

  • 111 Answers
  • Posted on Dec 12, 2008

SOURCE: Passenger window only works from drivers switch

If you have already replaced the passenger side switch and it still doesnt work its a good chance that there is a pinched wire in the door itself. However usually it wont work from the drivers side either. But I still suggest looking there first.

Ad

Anonymous

  • 28 Answers
  • Posted on May 13, 2009

SOURCE: 2004 Dakota Power Window

if you can work the pass side window from its own switch, id have to say the master switch is bad. let me know how it goes

Anonymous

  • 145 Answers
  • Posted on Jun 08, 2009

SOURCE: 1999 Dodge Durango driver side window does not roll up nor down.

Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Anonymous

  • 8 Answers
  • Posted on Apr 21, 2010

SOURCE: 2001 dakota passenger side power window not

it's probably a broken wire in the door jam on either the drivers sid or the passengers side.check the wires where the fold wher the door opens and closes

Anonymous

  • 11896 Answers
  • Posted on Sep 30, 2010

SOURCE: 2004 Dodge 2500 RAM Quad-cab.

The switch itself may be faulty. Have you tested it with an ohmmeter? Have you tested power to the passenger switch with a voltmeter?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Ford Expedition. Power windows not functioning properly. Can use driver side window from driver switch, and passenger rear window( slow response) Other windows will not respond via either switch. Can...

Looking at wiring diagrams to see what all is involved in the power window electrical circuit's an using a DMM- digital multi-meter to test the B+ ( voltage ) side of the circuit and the negative (ground ) side is how a professional automotive technician does it. All power an ground goes through the driver's door master switch . Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size . Under system click on body & accessories ,then under subsystem click on power windows . Click the search button then the blue link.
2003 2006 Ford Expedition Window Switch Replacement
2004 2008 Ford Power Window Repair
Ford Expedition Power Window Regulator Replacement


0helpful
1answer

Passenger Power Window Switches Do Not Function

All the wiring for all the windows flow through the master switch...both power and ground. So the problem is most likely a bad master switch or a broken wire in the hinge area of the driver's door. Get a wiring diagram and check for power and ground coming to the switch. If so, then the switch is most likely bad. Read this post http://ricksfreeautorepairadvice.com/window-goes-up-but-not-down/
0helpful
1answer

Follow me here: The driver side passenger window will go up and down while operated independently with the switch on its door. However, the driver seat master switch will not control window to go down

Not following you completely.
When you say driver side passenger window, you mean the driver side rear window ?
The window motors get power thru a power window control unit and thru the driver master switch.
You'll need a shop manual with the wiring diagrams to track down the problem.
0helpful
1answer

1993 Bighorn Passenger window not working

There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.
0helpful
1answer

1998 Jeep Grand Cherokee Laredo TSI, Passenger side windows do not work from master switch on drivers door. Both driver side windows work from master switch on drivers side. Passenger side windows do work...

It has to be the switch or the wiring, right? So pull out the switch and probe the back with a volt meter to see if power is coming out of the switch. If yes, trace the wires to the doors.
0900c152800aa140-zzyiglue2iivran2oy1paayi-3-0.gif
0helpful
2answers

2004 Malibu Maxx-Driver side and rear power windows will not go down. The power window controls for the driver side and both rear windows do not work. The only window that works is the front passenger,...

well you can try "jumping" the correct wire to see if window got up or down... this will tell u if switch is bad... but I would just go but a new master switch... try that before you cause more damage..
4helpful
1answer

Looking for wiring diagram for 2001 Firebird power window. Driver side is down and won't go up. Passenger side works. I have power going to drivers side and not passenger side from the driver control...

You'll need to pull the door panel and check for power and ground at the 2 wire connector located near the window motor (there should be a dark blue wire and a brown wire). With a test light there should be power on one of the two wires at any time. If there is power on both wires with the switch in the up position than the switch is bad. If the only wire powered up in the up position is the dark blue wire than try tapping the motor while holding the switch in the up position. If it starts to work than the motor is bad.

On a side note check for power with all the connectors plugged in. You can also jump the connections at the motor. Supply a ground to the brown wire and supply power to the dark blue wire and the window should go up.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

2helpful
2answers

Passenger window does not work

You can get a wiring diagram and tests light and test the circuits. Or just change the switchs the problem could be in a either switch. Also with the doors opened wiggle the wires going from the doors to the body while pushing on the switch. You may have a broken wire in this area or bad connection. Hope it works out.
0helpful
1answer

Power windows wont work

All things Capri are at //www.techcapri.com/
The manuals are there - check them out ...
Wiring diagrams are there. Probably fixed by now anyway.

Regards
Richrobi
Not finding what you are looking for?

312 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...