1999 Plymouth Prowler Logo

Related Topics:

L
Larry Torbert Posted on Mar 11, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Ignition module problems

My '99 Prowler has been running great for the last 267,000 miles, yes that number is correct, and was until about three weeks ago. I was cruising about 45 mph and it just shut down. I safely got to the shoulder and tried to restart. Engine turned over but did not start. Triple A brought it home and the next day I tried starting it again. Engine caught and sputtered and died. It did this several times and Ifinally got 3 coded. No. 5 coil, Cam/Crank sensor, and TPS. All of these have been replaced. No change. I removed the IAC and cleaned a load of carbon off of if. I also replaced the fuel pump but I'm still in the same place. Engine cranks and runs about 5 to 10 seconds and shuts off. Tach drops to 0 rpm like the fire has been cut off. No codes show in scan but I have a "check gauge" indicator. Seems like an electrical problem but I have no idea what would cause this problem. Can anybody help?

1 Answer

Jeff Armer

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Plymouth Master 15,575 Answers
  • Posted on Mar 11, 2017
Jeff Armer
Plymouth Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 22, 2012
Answers
15575
Questions
1
Helped
7100535
Points
73899

No Start Diagnostic Basics EricTheCarGuy Does it have spark ? fuel pressure ? Maybe your best bet would be to take it to a qualified repair shop .

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Apr 09, 2009

SOURCE: Van runs fine for 3 to 5 miles after startup then dies

Have your crankshaft sensor checked. I had the same problem with my van. After trying to fix it myself with a new computer, distributor, fuel pump and filter, and oxygen sensor, I ended up taking it to my mechanic who owns the same van. He immediately told me it was the crankshaft sensor and he replaced it and it runs great now. It cost me around $85 for parts and labor.

Ad

Anonymous

  • 79 Answers
  • Posted on May 20, 2009

SOURCE: 1997 Neon dies, starts after electric fuel pump relay swapped

Hello, I would assume this is your fuel pump inside your tank. I would first however do some basics like a general tuneup. For starters I would replace your spark plugs and wires, rotary cap and button and check your fuses. Run some injector cleaner through your system. You know quick simple cheap things before you get to the fuel pump inside the gas tank which can be kinda expensive. The warm up then dies can be caused by, "blownout or fouled," spark plugs. I hope this gives you a general direction in which to go. A sidenote is that coil packs do not normally run an igntion code and I for one do not like them becuase they are expensive.

Anonymous

  • 1776 Answers
  • Posted on Jul 23, 2009

SOURCE: Check engine light comes on, gauges light comes on

What sensors did you replace? It sounds like a problem that could be caused by something in the evaporative emission system, like a faulty purge solenoid or evap cannister problem. Does the tank take fuel slowly when filling up? You could also have a faulty gas cap. That is the first thing I would look at. It is an integral part of the evap system. Hope this helps and best wishes.

Petrica Voicu

  • 64 Answers
  • Posted on Feb 16, 2011

SOURCE: 1996 Plymouth Grand Voyager SE

This looks like you have the fuel tank vacuum. When is in repaus, the tank is sucking some air. When you start the engine, the fuel pump is sucking the fuel from tank and if this don't have a breathing hole or if this is clog or obturated then the fuel pump cannot **** anymore fuel and the engine stops. If you let it for a period of time alone then the tank might **** some air but not enough, so the engine will start but the simptome will show again. I had this simptomes with my car. Try to remove the fuel tank cap and see if you can drive more than 6-7 miles. If so, then the special breathing air hole in the fuel tank is clog. Identify it and clean it. I am not so sure about this problem but is just an ideea. Might be helpfull, who knows? Otherwise should be a PCM problem. In this case you should make a computer test. Good luck!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2005 Prowler runs good for about 20 minutes then back fires and dies, changed spark plug, replaced coil drained gas tank and replaced feul pump, any suggestions?

problem component in the ignition control module overheating and switching the module off
the backfire is an in appropriate spark time from a problem control module
0helpful
1answer

My '99 Prowler has been running great for the last 267,000 miles, yes that number is correct, and was until about three weeks ago. I was cruising about 45 mph and it just shut down. I safely got to the...

Start by checking all your fuses. If not, take your time and look for any bad plugs or connections in the wiring harness. Oil or debris might be making a contact you don't need. TAKE YOUR TIME DOING THIS! Also notice Cam and Crank sensor are two different ones.
1helpful
1answer

1990 Celebrity Wagon (Eurosport) 3.1 V6 Running fine. Drove approximately 8-10 miles to Walmart. Parked and was inside for 10 mins. When I came out it turned over great but would not start. Pulled...

The ignition module and the coil pack are not the same thing .. i think the coil pack is mounted on the front side of the engine nearest the radiator it might have three separate coils or they maybe all be in one pack . the ignition module is mounted under the coil pack . i would look at the ignition module 1st if the coil are separate and the crank sensor before i would replace the coils . a lot of these cars suffer from heat soak . which means when they get hot and some of the circuits open and cause a no spark condition . which is what the ignition module do a lot .
0helpful
1answer

Intermittent poor acceleration, loss of power. Has

How is your charging system? Sounds to me like it's not charging your battery, so it runs until the battery cannot support the ignition load.
0helpful
1answer

2003 mazda mpv stalls several times while driving, all dash lights come on, need to coast to a stop, problem occurred once a week for three weeks and then happened three times within a mile, re-started...

i would ask the mechanic to check the ignition switch for pitting ....i had this problem with my honda accord for a long time until i finally just switched it for the second time and sanded it down to the point that it would touch but not keep contact to make the pitting .... hope this helped
4helpful
1answer

Burning out the pickup coil in 1986 F-150 w/302

Hello genobeano: My name is Roger and I will give some information that should help. When you replace the pick up coil also replace the ignition module. The ignition module will short out the pick up coil. If the module is attached to the side of the distributor be sure to use die electric grease when installing the module on the distributor. Should you not use the grease you will burn up the ignition system. By the same token should the pick up coil short out the module will burn out. The fact it runs for a short time says that you have a heat problem. Normally is in the ignition system. There was a tech bulletin to replace the pick up and module as a unit to correct the problem.
Please rate the answer as this lets us know you received correct information. Should you need further help please just ask. Thank You for using Fix Ya. Roger
0helpful
1answer

99 Ranger- Consistant coil pack issues....

What is the engine size? Have you checked the ignition module? Check the output of the crank sensor at the ignition module to verify wiring integrity. The signal is shielded so insure there is no break in the insulation.
2helpful
3answers

While driving, the engine dies.

I had the same thing happen on a 91 Olds 88. Replaced crank shaft position sensor, coil, and ignition module. That solved the problem. I think the culprit was the CSP Sensor, but changed all three so can't say for sure.
0helpful
1answer

1989 park avenue would run about 60 miles then die, could restart immediately, but would go about 4 to 10 miles then die again, could restart immediately but would repeat the 4 to 10 mile thing. A couple...

check harmonic balancer for slop back and forth,,,,these 3.8's have a crank posision sensor behind the balancer,that run off of the balancer,,,gthe rubber wears out and they start to flop around and timing gets messed up.../they cost around 100 bucks for a aftermarket,and if thats the problem,do yourself a favor and replace CPS while tour at it....good luck...Lee
1helpful
2answers
Not finding what you are looking for?

267 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...