Mercedes radio removal

SOURCE: Radio Code for 1999 Mercedes E430

If you call your merc dealer they should give it to you on the phone, if not have a look at this web site, if not, then if you take out the unit and let me know the s/no: i will see i have it.
http://www.radio-code.co.uk/code-entry-help.php

[email protected]

mx5turbo92

• 545 Answers
• Posted on Dec 17, 2009

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

SOURCE: How do I remove my 1997 Mercedes E320 factory radio

the radio should pull right out. use 2 picks to grab the sides and pull gently.

SOURCE: How do I remove and replace the radio in a 1993

First thing is to understand you will most likely have to run all new speaker wire as the head unit in your car has everything external to the head unit (power amplifier, fader). The plastic around shifter pulls up off, then remove wood surround. Remove ashtray, pull face off head unit usually by sticking fingers in cassette area and pull. There will be plastic tabs on the bottom of unit push in and pull out on head unit, pull slowly so you can inspect wires for placement. Again rerunning speaker wire should be done to preclude external amps and fader switch and power antenna if yours still works.

Testimonial: "Thanks so much. This is very helpful!"

SOURCE: Mercedes Benz CLK 320 1998 Radio Code

radio code mercedes clk 320, 1998