If you can't find the diagram, you will need to draw out the routing direction of the old serpentine belt so that you can properly route the new serpentine belt around each pulley. or you can go to any auto parts store and they should be able to give you a diagram, or go to dealer to get a red out or diagram of your old belt. Good-Day!
SOURCE: serpentine belt
As silly as this may sound there should be a picture under your hood. It will be labeled " belt routing". If the diagram is missing then you can pick up a chilton manual at your local parts house for about $20. It also has a ton of other useful info that may surprise you. Hope this info helps. Good luck.
SOURCE: need serpentine belt routing for 2006 chrysler
Hello Damon104.
The best way to help you with this question is to give you this site.
Dayco belts offers this and covers most makes and models.
www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n
I hope your repair goes well for you.
Kl
SOURCE: 2007 chrysler sebring serpentine belt diagram
Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.
SOURCE: 2006 Chrysler Pacifica serpentine belt routing
here are a couple diagrams...
If you need anything else, let me know.
454 views
Usually answered in minutes!
×