How can I check the wiring, since part of the seat moves..up and down and right side of seat moves forward and sideways, what can I do to repair
SOURCE: Power Seat does not work on Expedition.
Have the same issue with mine. My solution was to take the seat out, real easy. And clean the entire motorized system with some MAF/electronic cleaner. From time to time I still have to play with knob a couple of times. My issue is the knob not motor. Not sure what the noise is. This could be the motor. Ensure you don't have any unknown obstructions blocking the motion.
SOURCE: Power Seat Control does not move the seat front or back
Try tapping the power seat frame with a hammer to unbind the motor .
SOURCE: heating element in seat ford f150
It can be done, but for the cost of a new heating element, it is worth the purchase. The replacement for my 2001 I think was ~ 40.00 ( online, plus shipping costs ) for the bottom cushion heating element.
You can take the same amount of work to remove the seat cushion, remove the cover, and try soldering the broken elements ( usually the thigh area in the front ), but you have a used element that is patched. The way I have seen it done, is actually using wire to close the circuit again, not create a new element section.
The seat bottom work is a bit much ( to make sure the cover is on straight and no creases ) to spend the time patching vs. replacing what is a fairly cheap part.
You can try Tasca and Southwest ford parts online for the current element pricing.
Depending on the shape of the cover and cushion itself, you might consider replacing those ( or the cushion ) as long as you have it apart, but this is getting a bit expensive ( would be ~ 200.00 for all 3 new ).
I did the cushion at the same time, and it made the world of difference to the feel of the seat, just like the day it came out of the factory.
223 views
Usually answered in minutes!
×