Brake & ABS ligths
SOURCE: I replaced the brake pads on a 2008 Town &
the only metal to metal noise that can be generated from the brake area is the retaining spring for the pads or the wheel bearing.jack up the wheel and try for play....
SOURCE: 1997 town & country stalls intermittently. ...
I had the same problem in the past with the lights. I repaired it by removing the the dash panel and re-soldering the pins where the harness plugs into. I am currently having the stall issue. in my research it seems to be the crank shaft sensor. I was told that the crank shaft sensor and the cam sensor work together and have decided to change them both along with the gas filter.
SOURCE: 2002 chrysler town & country blinking abs
Thanks for choosing FixYa and welcome to the site. I have seen this before and it is fairly common on these vehicles. It is usually a malfunction with the dash cluster instrument lighting. In conclussion, it will appear when nothing is wrong. Since there are no codes stored and everything works correct, you may just want to deal with it instead of paying out hundreds of dollars. At least once, a client bought a new cluster and the next day, the light was back on. It could be an issue with your pcm also, since the pcm controls the interior lights. It will take testing to know the sure cause of the light that will cost money. In my opinion, since there is no codes and the system works perfectly, I wouldn't worry about it. I would double-check everything first to make sure everything has been fixed correct first. Check all break components. It is worth getting it tested because breaking issues may occur. It may be a sensor. But it can also be a false impulse also.
SOURCE: brake pad replacement on 2008
Just changed the brakes on my 2008 Town & Country. You need a rear disc brake caliper tool. The piston does not compress, it turns clockwise with the tool. You can get the tool from Auto Zone and when you return the tool, you get your money back.
194 views
Usually answered in minutes!
×