2008 Dodge Nitro 3.7 Logo

Related Topics:

A
Anonymous Posted on Jul 21, 2014

Replace side mirror on 2008 Dodge Nitro SLT? - 2008 Dodge Nitro 3.7

5 Related Answers

Anonymous

  • 51 Answers
  • Posted on Aug 09, 2008

SOURCE: Replace side view mirror on Dodge Caravan

You will need to remove the triangular panel on the inside of the door on the opposite side of the broken mirror. Once you remove the panel, you will see the retaining bolts holding the mirror in place. Once you remove the bolts, the mirror can then be pulled out from the outside. Reverse the procedure to reinstall the new mirror.

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 23, 2009

SOURCE: Replacing passenger side-view mirror on 1999 Dodge Stratus

Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .

Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!

Anonymous

  • 191 Answers
  • Posted on Jan 04, 2010

SOURCE: 2008 dodge nitro 3.7 engine. The engine missfires

Have it checked for trouble codes sounds like it could be an injector problem or something as serious as a loose rocker,maybe try a crank&cam shaft position sensors

Anonymous

  • 113 Answers
  • Posted on Mar 13, 2010

SOURCE: where is the oil filter located on my 2008 dodge

You can access the oil filter easily from underneath next to the front, driver-side wheel at the front of the engine. There is clear access to the filter there.

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Jul 14, 2010

SOURCE: How To Replace A Side Mirror On A 2008 Charger

Check this procedure about 2006-2009 Charger.

Hope helps (remember rated this).

Testimonial: "Thank you so much this will be a Big help"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the location of the fuel pressure regulator sensor on dodge nitro slt 2007 and what does the part generally cost.

I'm not aware of fuel pressure regulator sensor? I am aware of fuel pressure regulator, should be part of fuel pump assembly. I'd replace whole assembly, if that's the problem? You can look at online automotive parts book to see price. good luck
0helpful
1answer

How do i change out the flex plate in 08 dodge nitro slt 3.7?

I am not familiar with the model but changing a flexplate is neither quick or easy as either the transmission or the engine must be removed and with some vehicles the power unit must be completely removed and separated on the bench.
1helpful
1answer

2008 Dodge Nitro Bank 1 Sensor 2 How do you replace and where is it located?

its on the driver side exaust pipe after the last catalytic converter the last thing pluged in on the exaust driver side.you will need a 7/8 wrench
0helpful
1answer

HOW DO I REPLACE AC CONDENSER ON 2007 DODGE NITRO

You can't it needs to be done by a dealer, they have to
Evac all the old R134 and replace unit and then fill with all new oil and R134. Expensive fix.
0helpful
1answer
0helpful
1answer

How do I change the mirror on Dodge Nitro?

You have to start with removing the door panel as follows:

CAUTION: Pay close attention to the plastic hook attachment points on the inside of the door trim panel. Make sure that every hook is correctly positioned to the door when installing the trim panel. Damage to the trim panel will occur if the hooks in the door panel are not properly positioned to the door during installation. 1. Connect the electrical connectors and install the power window switch. 2. Carefully install the door trim panel (4) to the door (1) by lifting upward and over the door lock into the trim panel then attach the trim panel to the carrier plate attachment points. 3. Install the screws (2) and the cap screw covers (3) to the front door trim (4). 4. Install the fastener (5) at the handle area of the front door trim (4) and tighten screw to 5.5 Nm (50 in. lbs.). 5. Install the door handle trim bezel (6).

1. Install the mirror assembly (1). 2. Install the three nuts (2) and tighten to 7 Nm (65 in. lbs.). 3. Connect the electrical connector (3). 4. Install the trim panel
0helpful
1answer

Replace side mirror on dodge nitro

d184163f-8f7a-4c0e-b40b-66a5e544058e.jpg
I'm adding these pics after doing this from mpodeszek comment, I thought pics might help, super easy!
ac92ce46-1ede-464b-8824-834ac80eb836.jpg 505a55e4-12ff-47b9-84e3-4443ba3baf81.jpg 25dce009-99c3-464d-9a97-965fdd157f91.jpg 96aa0034-b987-4425-a539-701edeea9f31.jpg 91aacb22-ae53-4872-bdb2-a4422cea3d27.jpg
Not finding what you are looking for?

315 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...