Where is the low pressure port on a 1998 ford windstar?

SOURCE: 1998 Ford Windstar AC compressor

They get more than warm, but not excessively hot that you can't touch it. This can be caused by a faulty condenser fan motor, dirty condenser coil even low freon, which is my guess along with a dirty condenser. Check these two issues and if it's not the problem your compressor may be getting ready to die. because of internal issues with the motor windings. Make sure the fan is running to speed, clean the condenser and see if the larger copper pipe to the compressor is ice cold and sweaty, if not you may need freon

SOURCE: 1998 Ford Windstar Transmission to 2000 Ford Windstar

while it is possible to perform that swap, the newer 2000+ transmissions will have updated internals and such.

so will it work............. yes.

is it optimal.................no.

SOURCE: AC low pressure port 2001 Ford Ranger 3.0L

look for lo and hi on the cap.
please see this layout diagram... and you can trace it down yourself.


The lines coming on the dryer canister are HI side.
Use the opposite one to charge.

Thanks for using FixYa - aFixYa rating is appreciated for answering your FREE question

SOURCE: Low pressure port 2000 ford explorer

im assuming your talking about the a/c low pressure port? it should be on the receiver/drier(steel can with 2 lines hooked to it) or in the lines connecting to it

SOURCE: WHERE IS THE LOW PRESSURE PORT FOR A 2001 FORD F150?

It may be located on/near the evaporator case where the big (suction) line comes out.