Are you hearing any noises from the pass door when you activate the lock switch? If not, the power door lock solenoid has failed, and prob needs to be replaced. Pull the door panel & check to see if it is getting power to the solenoid in lock & unlock. If it has power, the solenoid is def bad.

dstke

3 Answers
Posted on Mar 30, 2009

SOURCE: how do you replace driver side mirror on a toyota highlander

It's easier if you buy the replacement mirror first. You'll see that the plastic mount for the mirror slides up and then clicks in. To remove the old mirror pull out at the bottom then slide down (shouldn't really need to slide down as the mount will come out when the bottom is un-clipped. To install new mirror, slide up, be sure that the mount is well into the upper tabs then push in the bottom two clips. Double check that the mirror is secure by pushing in on the top and trying to pull the mirror down.

Anonymous

490 Answers
Posted on Apr 16, 2009

SOURCE: Power lock on driver side door does not work on2003 Toyota Celica

remove the door panel and change the solenoid on the inside of the door

Anonymous

155 Answers
Posted on Jul 06, 2009

SOURCE: '00 Toyota Sienna-stuck door

the lock actuator is binding/hanging up, replace it and lube the linkages this should cure that problem....hope this helps...let me know...GL

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1helpful

1answer

Windows not go up and down in a toyota highlander, could i fix myself?

I hate to ask, but have you checked the fuse? If neither side window goes up from the control on either door, it's something in common on both sides which is the fuse or the window lock on the driver's side.

Read full answer

Jul 11, 2015 • Cars & Trucks

1helpful

1answer

The rear door on my 2010 highlander says it's open and getting nuisance alarms. I know the sensor is in the locking mechanism, however that part is $400. Where is the door ajar chime so I can remove it?

Here is what another Highlander owner said: "2010 Highlander 4WD: System check panel I indicating the rear door is open, when it's not. Been to dealer 3 times. Car has 6000 miles on it. The rear door open indicator effects door locking ability with key fob as well as continual chime indicating rear door is open in conjunction with turning dome light off and on. Dealer thought it was rear door strike plate. Adjusted accordingly. This was not the problem. 3rd visit to dealer still trying to pinpoint why this is happening so far no luck. Electrical bad door sensor faulty electrical door switch this problem is very annoying and now times consuming 3 visits to the dealer and still no solution. Rear door open indicator initially made to stop by rolling down driver side window at highway speed. Indicator also made to go off when road turns to the left only. <- " moisture causing short in rear door electrical switch" maybe.

something like this. You can remove it.

Read full answer

Mar 29, 2015 • 2010 Toyota Highlander

0helpful

1answer

The central locking on the driver's side door on my 2004 Toyota Kluger (Highlander) clicks constantly as the car is driven. The 3 other doors are un-locking and locking in time with the clicks, but no

the drivers door lock actuator controls the other locks , known as a five wire system , you will have to renew the drivers door lock actuator as i have never come across one of these that can be repaired , search ebay as will be a quarter of the dealer price.

Read full answer

Sep 29, 2014 • Cars & Trucks

0helpful

2answers