2005 Chevrolet Impala Logo

Related Topics:

A
Anonymous Posted on Jul 12, 2014

Impala 2005 3.4 truck off and abs indicator light turns on after one minut drive

3 Related Answers

Anonymous

  • 295 Answers
  • Posted on Mar 18, 2009

SOURCE: abs and trac light

The dealer has to reset the system. The time is usually one hour.

Ad

Anonymous

  • 10319 Answers
  • Posted on Jan 10, 2010

SOURCE: No ABS or ABS light on 05 Impala.

Light bulb burnt out?

daves944

Dave C

  • 1050 Answers
  • Posted on May 31, 2010

SOURCE: 2005 impala ls the abs light and the traction control light comes

You'll need to have the codes read from the computer. You will have a code that indicates one of the front wheel sensors is bad. This could be the case, but they are very expensive as they are built into the wheel bearing assemblies. It is more likely that the wiring harness between the frame and the part of the front spindle that holds the harness, has broken internally. It is a very common problem and can be repaired with a new wiring harness section or by tracking down the fault and repairing it.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Service traction system

Don't mess with the ABS light get it diagnosed and fixed. Your brakes will work with the ABS light on but you will skid because the system will switch to basic hydraulic action with no control of how much to each wheel. If ABS is on then it is not working.
0helpful
1answer

2005 Chevy impala brake pedal pulsation with brand new rotors installed

Is your ABS working properly? Under heavy braking the ABS should engage and 'pulse' the brakes on/off. It is normal to feel the brake petal flutter or pulse under your foot.

Under light braking there should be no pulsing as the ABS does not engage and you have changed the rotors and pads.
5helpful
1answer

I have a 2005 Chevy Impala, the Traction light comes on and the car makes a grinding noise when I put it in drive after it has been parked. My Service Traction light has come on and the ABS light at the...

The ABS control Module is going bad, that all, since the ABS and traction work together you will get both lights on. Take to a mechanic, expect to spend about $500.
0helpful
1answer

I have a 05 impala. Abs/trac light came on with service trac control message. took and had code pulled and was told short in abs cicuit.? thanks for your help.

yes the abs and trac work on the same sensors, could be a bad wire, sensor,have it put on a real time scanner where you can read all the sensors and actuators while driving, easiest way
11helpful
1answer

2005 impala ls the abs light and the traction control light comes

You'll need to have the codes read from the computer. You will have a code that indicates one of the front wheel sensors is bad. This could be the case, but they are very expensive as they are built into the wheel bearing assemblies. It is more likely that the wiring harness between the frame and the part of the front spindle that holds the harness, has broken internally. It is a very common problem and can be repaired with a new wiring harness section or by tracking down the fault and repairing it.
1helpful
1answer
1helpful
1answer

How do you turn off the traction control light on a 2005 impala and or fix the problem

will have to be turned with a diagnostic machine that can scan ABS
2helpful
1answer

2005 impala

All the hubs on the car have the abs sensor built into the hub. The abs system has to be re set to read the sensor . The rear hub bearing if noisy should be replaced. There are wiring harnesses that connect to the abs sensor. The harnesses to each of the abs sensor should be replaced.
4helpful
1answer

2003 Chevy Impala Service Traction Sytem show on Dash

I can't answer the question about the gas fumes, but I had the same problem last year with the "Service Traction Sysytem" message and the Trac and ABS lights coming on in my Impala. Mine turned out to be because of a bad wheel bearing, that was causing the ABS and traction system not to work. I'm not sure if you've experienced this, but another thing that would happen with mine was that I would go to brake and have a hard time depressing the brake pedal, almost like it was pushing back. That is the point when the Trac and ABS lights came on.
12helpful
2answers

Abs needs service & traction control, both icons light up and they spell it out. 2002 coupe

i would tell ya what i found and how i fixed it for the sum of 15.00.
Not finding what you are looking for?

45 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...