1993 Pontiac Grand Am Logo

Related Topics:

Posted on Jul 12, 2014

Where is the map sensor on a 1993 pontiac gp le 3.1

5 Related Answers

Anonymous

  • 3 Answers
  • Posted on Mar 04, 2009

SOURCE: removal of a 93 pontiac sunbird LE transmission

You can remove it WITHOUT REMOVING THE MOTOR. It's not that hard, I was able to put in a new clutch system within 8 hours. Here is pretty much what you have to do:

When looking at the engine after lifting the hood, you need to put a jack under the motor and if you have it, either another jack under the trans or what works MUCH easier is an Engine hoist.

Disassemble the motor mount on the right side of the engine compartment (When looking at it from the front of the car. Remove the tire, remove the brake pad and disc rotor from the assembly and pull the nut that is holding the drive shaft in place. You can then just tap it with a hammer until you release the shaft from the hub assembly. (You know that hunk of steel or metal that your wheel studs stick out from.) You can then undo the bolts around the transmission, then use the jack to lower the motor until the trans just clears the wheel well.

You slide it out with either the jack or use the engine hoist ( I WOULD PREFER TO USE THE SECOND JACK TO SLIDE THE TRANNY RIGHT OUT OF THE WHEEL WELL)

Then use the Hoist when trying to line it back up. Put everything back the way you removed it and there we go.

[email protected] (You can message me if you have anymore questions.)

I HAVE A NINETY ONE THAT I REPLACED THE CLUTCH IN SO THAT WOULD BE THE EASIEST WAY TO MY KNOWLEDGE.

Ad

Anonymous

  • 65 Answers
  • Posted on Jan 24, 2010

SOURCE: 2001 PONTIAC GP 3800, BANK ONE O2 SENSOR

probably not the o2 sensor but some other problem causing that code does it say bank 1 lean or rich?

robert wales

  • 4977 Answers
  • Posted on Sep 04, 2011

SOURCE: Leaking oil very badly at

this sounds like the oil pressure switch(ops) is leaking.pickup a ops and replace the sensor and the leak will stop

Testimonial: "Thank you very much for your help. This is going to be my plan of attack to this problem. I'll let you know how it works out and thanks again!"

jerry_kramer

Jerry Kramer

  • 3933 Answers
  • Posted on Jul 13, 2014

SOURCE: Why is my 1993 Pontiac GP LE 3.1 hard starting,has a rough idle and smoking from tailpipe.

Better get this one to a mechanic. Sounds like you blew a head gasket.

jessejames1

jessejames1

  • 93 Answers
  • Posted on Jul 13, 2014

SOURCE: how do I find the map sensor on a 1993 pontiac gp le 3.1?

It is located on top of engine mounted on the intake manifold between the engine and the firewall. #12 in picture provided 4a24a77e-07e7-48fd-abfe-9e77134efec6.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I change the vacuum hose on map sensor?

Check to make sure there are no cracks or leakage from the hose on either end or somewhere along the hose. If good, try disconnecting the negative battery terminal for at least 30 seconds to clear the computer. If not, could be bad sensor or incorrect one for that year / size engine.
0helpful
1answer

How do I change the vacuum hose on map sensor?

Simply go to a local parts or hardware store and get a piece of vaccine hose that's identical in size(take your old hose from your map sensor with you if at all possible to match up the sizes), then buy the length you need as it's usally sold by the foot and take it back home an qndbinsrall it in place of the old one. If you have vacuum leaks or anything like that you can find the source by spraying carburetor cleaner very gently(like a mist) on the various vacuum lines of the engine(and the intake manifold) and it'll be very obvious if you hit a vacuum line that's leaking. Google how to check vacuum lknes with carb cleaner or watch a YouTube video explaining it and it'll be a trick you'll never forget, it's sinpe and effective! See Below, best of luck my friend!
0a7c8e81-2218-49e5-afe6-bad4f82c04ec-v455pll4ph1iuhq4hyvvlrzq-3-0.jpeg
0helpful
1answer
0helpful
1answer

Why is my 1993 Pontiac GP LE 3.1 hard starting,has a rough idle and smoking from tailpipe.

Better get this one to a mechanic. Sounds like you blew a head gasket.
0helpful
1answer

How do I find the map sensor on a 1993 pontiac gp le 3.1?

It is located on top of engine mounted on the intake manifold between the engine and the firewall. #12 in picture provided 4a24a77e-07e7-48fd-abfe-9e77134efec6.jpg
0helpful
1answer

How to replace map sensor on 93 Pontiac GP LE 3.1

Very easy. Unplug the three wire connector to it, pull off the vacuum line, and dismount if from its mooring. It's on the passenger side at top of engine, back near the firewall, or on that back side of the engine.
0helpful
1answer

Location of FPR on 93 3.1multi-port- pontiac gp le

If the FPR is bad, gas will come out of it when you remove the vacuum line. John C ... 1993 pontiac grand prix 3.1l fuel leak under throdal body
Not finding what you are looking for?

45 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...