The crankshaft position sensor mounts to the engine block behind the alternator near the oil filter.
SOURCE: location of crankshaft position sensor
I have a 2005 neon and i found mu crank sensor on the radiator side of the block driver side of center directly below the starter. I hope this helps..
SOURCE: 04 Dodge SRT 4 crankshaft sensor
The Crankshaft Position Sensor is located directly next to the starter.
Reverse Order to install except note that:
Use a twisting motion when installing the sensor.
Install and tighten the crankshaft position sensor bolt and tighten to 9 N·m (80 ±15 in. lbs.).
SOURCE: crankshaft sensor
2-0L-2.4L I-4 crankshaft sensor mounts to the engine block, behind the alternator, just above the oil filter. 2.5L V-6 crankshaft sensor mounts to transaxle just below the distributor.
SOURCE: need to know where crankshaft sensor is located on
The 3.3/3.8L crankshaft sensor is located on the rear of the transmission housing, above the differential housing.
SOURCE: 2002 dodge stratus crankshaft sensor location?
The crankshaft or the shankcraft as we refer to it is inside the engine, it turns over the pistons. Never heard of such an animal. You may have a fuel pump going out, clogged fuel filter, fuel injectors, Idle air control valve going out, bad plugs, plug wires or distributors. Just began checking them one at a time.
980 views
Usually answered in minutes!
×