SOURCE: blower works. However, only at one speed: LOW. no matter if set at low, medium, or high.
After two summers of sweating under the sun, it's fixed!!! There were two wires which looked like ground wires right above the glove box. One of the two wires was almost totally severed due to an overstuffed glove box. I guess every time I open and close the glove box, paperwork in the glove box push the wire up and down. It's like bending the wire back and fourth. Over time the 2-3 mm thick wires slowly sever. Upon inspection, my wires only had 3 strands holding it together which explains the fan staying on the low position due to slow ground. I re-attached the wires and soldered them back into place. Now my AC works like new - thanks to Mathew the Mechanic.. Thank you for asking. I really hope this posting helps someone with the same unique problem.
HEATER BLOWER MOTOR
Its
faulty blower motor resistor. The low and medium speed on blower motor is
controlled by resistor and its actual speed is high. So because resistor is not
working, blower motors actual speed which is high is working.
It
can be faulty blower motor or faulty blower motor resistor. Get the blower
motor inspected. If it's faulty it has to be replaced.
=======
For
blower motor testing and replacing, check the link below: ----
http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html
------------
These will help.
Thanks.
HEATER BLOWER MOTOR
Its
faulty blower motor resistor. The low and medium speed on blower motor is
controlled by resistor and its actual speed is high. So because resistor is not
working, blower motors actual speed which is high is working.
It
can be faulty blower motor or faulty blower motor resistor. Get the blower
motor inspected. If it's faulty it has to be replaced.
=======
For
blower motor testing and replacing, check the link below: ----
http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html
------------
These will help.
Thanks.
HEATER BLOWER MOTOR
Its
faulty blower motor resistor. The low and medium speed on blower motor is
controlled by resistor and its actual speed is high. So because resistor is not
working, blower motors actual speed which is high is working.
It
can be faulty blower motor or faulty blower motor resistor. Get the blower
motor inspected. If it's faulty it has to be replaced.
=======
For
blower motor testing and replacing, check the link below: ----
http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html
------------
These will help.
Thanks.
32 views
Usually answered in minutes!
×