What is the spark plug gap for a 2001 siverado?

SOLVED: What is the spark plug gap for a 2.4L mitsubishi - Fixya

https://www.fixya.com > ... > 2001 Mitsubishi Eclipse

Apr. 12, 2010 - Generally speaking, 0.039-0.044 is a decent range for platinum or copper. Iridium fine-wire plugs generally should not be gapped ...
1 answer · 1 vote: 1.0 - 1.1 mm (0.039 - 0.043 inch)
What is spark plug gap setting for Mitsubishi L300 2008 N ...
Sep. 27, 2012
I would like to know the points gap for a mitsubishi L300 - Fixya
Nov. 16, 2019
Io would like to know the points gap for my mitsubishi L300 ...
Dec. 1, 2010
SOLVED: What is the spark plug gap for a 2001 saturn L200 ...
Oct. 3, 2010
More results from www.fixya.com

2001 really., that year? wrong year, you did that.
in the usa, (this is a usa forum)
posted 100s of times.
open hood, look up under hood, see that EPA sticker,
showing just that?
the 3.2L was introduced in 2008/9
depends on what plugs, some are not gap settable.
usa spec, 2010.
read this FSM page.
hen servicing an iridium spark plug, do not touch the center electrode. The center electrode on this type of spark plug is slender and can be damaged if a mechanical force is applied. Do not clean or adjust the gap for the iridium spark plugs.
IF NOT THAT THEN,
old technology spark plugs, not above.
The 3.2L engine spark plug air gap specification is: 0.043-0.047 inch (1.1-1.2mm).

If the engine is turning over than none of the things you replaced will make the engine"start". You will need to check for fuel pressure and spark first.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

.044

Hello: Have you recently had any work done to it ? It may need a tune up.That includes spark plugs, spark plug wires, and a distributor cap, and (rotor if applicable).You may have a bad or cracked spark plug wire causing the spark to jump once in awhile.

.060"

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

GAP=0.050"

go to auto parts get you a plug gauge,they will help you gap your plugs to spec,thank you

2.0L SOHC (single overhead cam) AGSF34EE plugs gap 0.054
2.0L DOHC (dual overhead cam) AZFS32FE plugs gap 0.050

The plug numbers are the motordraft numbers