How to replace a starter on cutlass cierra 91

Dar

• 2007 Answers
• Posted on Apr 08, 2009

SOURCE: How do I change out headlight bulb on 91 olds cutlass cierra

Behind the headlight, you should see the nylon bulb holder. Turn it counter clockwise, about a 1/4 turn, and it should come out. Pull the old bulb straight out, and replace it with the new one. Don't touch the glass part of the new bulb with bare fingers, or you'll be replacing it again. Use cotton gloves or a paper towel. Put the holder back in the headlight, turn it clockwise until it locks.

SOURCE: Trying to locate the fuel pump for a 1994 Old cutlass cierra

The fuel pump is located inside the gas tank. You have to remove the gas tank to change it.

Steven A

• 427 Answers
• Posted on Feb 11, 2010

SOURCE: where is the pcv valve located on a 91 olds.

Should be mounted on one of the valve covers.

SOURCE: could someone have removed my pcv valve before I

Sure they could have.

BUT NOT LIKLEY.

The PVC valve is needed to clear the mixed gases from the crank case

RECOMENDATION:

Go to your local Parts store and have the attendant point out your PVC valve and replace it.

1991 is way past due for replacement.

Hope this tip helps.

R/
David

SOURCE: How to replace starter in a 1991 Cutlass Ciera

I had to do mine recently. You have to remove the radiator to make elbow room. Then jack up the car, as the trick is to remove the motor mount, then jack up the motor itself as high as you can get it to go. At that point you should be able to see the starter. That frees up getting to the starter. The rest is easy, no explanation required, it's just figuring out how to get to it that's a bear. Good luck.