How to bleed the radiator on a peugeot 2006 307 XS model

B1GG0RK1 - 206 TU ENGINE DW8 ENGINE
DRAINING - FILLING - BLEEDING COOLING SYSTEM
1 - SPECIAL TOOLS
[1] filling cylinder (-).0173/2 .
2 - DRAINING
TU ENGhow to bleed the radiator on a peugeot 2006 307 XS - b1gk070c.gif src="/uploads/images/b1how to bleed the radiator on a peugeot 2006 307 XS - b1gk073c.gifalt="b1gk070c.gif" class="h_mi" />DW8 ENGINE
ALL MODELS
Carefully remove the expansion chamber cap .
Unscrew how to bleed the radiator on a peugeot 2006 307 XS - b1gk074c.gif drain plug (1) .
NOTE : fit a pipe to the outlet to allow cleanhow to bleed the radiator on a peugeot 2006 307 XS - b1gk075c.gif the system .
TU ENGINE
DW8 ENGINE
ALL MODELS
Open the bleed screws (2) .
DW8 ENGINE
Drain the engine by removing the plug (3) .
ALL MODELS
3 - FILLING AND BLEEDING THE SYSTEM
Before any re-filling operation, flush the cooling circuit with clean water .
WARNING : check the cooling system for leaks .
DW8 ENGINE
TU ENGINE
ALL MODELS
Fit the filling cylinder [1] to the filler opening .
Open all the bleed screws .
Fill the circuit slowly with coolant .
Close the bleed screws in the order in which the liquid flows without bubbles .
The filling cylinder must be filled to the 1 litre mark to bleed the heater matrix correctly .
Start the engine .
Maintain the engine speed at 1500 to 2000 rpm until the end of the second cooling cycle (fan(s) starting then stopping) keeping the filling cylinder filled to the 1 litre mark .
Stop the engine .
Remove the filling cylinder [1] .
Immediately tighten the plug on the expansion chamber .
If necessary fill up to the level of the maximum mark (Engine cold) .