1997 Mercedes-Benz E-Class Logo

Related Topics:

A
Anonymous Posted on Jul 03, 2014

How i can fix my mercedes 202 1997

When i start the car after while will get off the engine then again start it will take ten minutes then again stop some times times runing well i change the fuel pump with filter still the same pls help me to solve this problem

5 Related Answers

ilragatzzo78

francisco navarro

  • 241 Answers
  • Posted on May 28, 2008

SOURCE: no fuel coming from fuel injection pump,bosch inline 5 cylinder

IT SOUND LIKE A BAD FUEL PUMP TO ME.
TRY SCANNING THE VEHICLE FOR ANY CODE.
IF THERE ARE CODES POST THEM HERE AND I WILL LOOK THEM UP FOR YOU

Ad

Anonymous

  • 224 Answers
  • Posted on Jul 04, 2009

SOURCE: 1989 Mercedes 300E dual fuel pump?

i would replace both because they are only good as the bad one

Anonymous

  • 25 Answers
  • Posted on Aug 29, 2009

SOURCE: mercedes E300 turbodiesel, 1999, is poor to start

Yes sir , you have a failing valve, soon it will snap in two....please have your head checked. You can do this yourself by placing a long-handed screwdriver , business end down to each cylinder while pressing your ear to the handle(while engine is running)...you will notice a definite difference when you hit which cylinder has the bad valve. Also makes sure the egr valve is clean and your exhaust recycle valve is not stuck.( located in the crossover pipe)

Anonymous

  • 2 Answers
  • Posted on Sep 10, 2009

SOURCE: 1994 C220 mercedes stalling problems

check your main harness wire. The harness wire becomes brittle and will eventually short circuit your car. Stalling and hard starting is the initial symptom. If not replaced soon, your car will smoke and eventually affect your computer box

Anonymous

  • 35 Answers
  • Posted on Oct 15, 2009

SOURCE: i have a c220 mercedes and have had problems starting the car

sounds like wiring problem engine harness

Testimonial: "OK THANKS FOR YOUR HELP, I HAVE CHECKED THE WIRING HARNESS AGAIN AND HAVE NOTICED THAT POWER TO NUMBER 1 INJECTOR DISAPPEARS AFTER THE INITIAL CRANKIN"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2006 Mercedes Benz CLS500. It turns off after ten minutes every time and won't start until 15 minutes afterwards.

Question edited for clarity.
Question moved to model category.

You need a local mobile auto electrician with a $5,000 pro grade scan tool computer. They can diagnose static issues but can also record exactly what happens to make the car shut off after 10 minutes and what happens 15 minutes later to make it start again. You can't guess issues like this on a car with so many computer modules and sensors.

https://www.google.com/search?q=auto+electrician+near+me

This says it might be the Crankshaft Position Sensor?

https://www.google.com/search?q=2006+Mercedes+Benz+CLS500+cut+out+after+10+minutes

....
0helpful
1answer

Mercedes 190e 2.6 1989 6-cyl. I warm-up my car for 2-or-3 minutes the engines stop.It's crangking but it will start. after 1-hour waiting my car will start the engine. Pls help me. tnx fix ya!!!!

engine coolant temp sensor for engine control management out of range easy replacement its fitted in the cylinder head i think ? its a common fault hope this helps.
1helpful
1answer

Engine stop

It could be the fuel pump relay.i had similar thing with an mk2 astra that would cut out then in a short while start again.
Good luck!
1helpful
1answer

Engine stops while driving stalls up ten minutes later

Are you meaning to say that it stops and wont start again for 10 minutes?
0helpful
1answer

Polo screeching sound

It's probably a worn or loose (or both) drive belt
0helpful
1answer

2002 vue v6...starts and runs well however when I stop , shut off the engine, then try to start after half hour , it wont start

Lookfor a light on the dash that says SECURITY or ANTITHEFT. If you see this light, that is a sign of a failed or failing antitheft system, which will disable your vehicle. This link explains

http://vatspasslockpasskeysecurityhelp.yolasite.com/
0helpful
1answer

Cold start is fine but after warm start the engine misses and sta

I would start by changing the fuel filter then check to see if there is any water in the fuel if those are ok see if a critter built a nest in the air filtter or the exhaust.
2helpful
2answers

MB 190E will start and stall within 2 seconds

cold start relay either the fuse in the relay, or the relay itself.
2helpful
1answer

3ltr will run OK then cut out (no warning) will start when cool.

This problem is caused by a faulty thrust switch which is located on top of the intake manifold where the throttle linkage is located. It is a safety feature which, in case of collision, will kill the engine. This switch can short with age, and in the case of my 1989 300e, would kill the engine on left turns and approaches to a stop light. You can purchase a replacement at autohausaz.com, the part is located under "electrical" category, and itemized as "switch". The proper name is "thrust switch". It costs about $29.00 dollars and takes about ten minutes to replace.
0helpful
3answers

Engine

have you fuel pressure check and if not good replaqce fuel pump
Not finding what you are looking for?

60 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...