SOURCE: how to replace a radiator in a chrysler concorde 1998 3.2
Disconnect negative battery cable.
Drain cooling system.
Disconnect upper radiator hose.
Remove upper radiator closure panels.
Disconnect electrical connectors from electric fans.
Remove all mounting bolts for electric fans then remove from vehicle.
Raise vehicle. (You might not have to, but its easier)
Remove lower splash shield.
Disconnect lower radiator hose.
Remove lower condenser mounting bolts.
Lower vehicle.
Now back to the top.
Remove upper radiator mounting brackets and bolts.
Remove upper condenser bolts.
Now separate condenser from radiator.
Tilt radiator toward the engine and remove it from the vehicle.
Hope this helps
SOURCE: what is a engine code 55??
Code 55 means 'End of code read-out', but not actually giving you any errors.
Seems to me though that it may have something to do with the fuel pump seeing as banging the fuel tank made it work for a little while.
To find the real problem have a dealer or mechanic troubleshoot.
SOURCE: fuel filter for 2001 chrysler concorde
for the most part it on the driver side under the car close to the frame of the passenager side just in front of the rear tire in the frame also checkout this website to see if they have your car listed its www.autozone.com if they do you be able to get pictures and diagram showing you where its located on your car.
SOURCE: will only blow cold air , sometimes it will blow hot
sounds to me like a blend door problem or blend door actuator problem
Fig. 5: Carefully pry the regulator from the fuel rail
Hope this helps (remember to rate this answer).
216 views
Usually answered in minutes!
×